Prinsu Roof Rack For Toyota Rav4 5th Gen 2019-2024
SKU: 800-000-000-079
Prinsu Roof Rack For Toyota Rav4 5th Gen 2019-2024
SKU: 800-000-000-079
$645.19$799.00
Fully Modular Design:
All Prinsu roof racks come in a fully modular design. What does that mean? Simple, you can add and remove all the cross bars (or slats) easily from the sides of the rack, to either carry more and heavier gear, or have a better accessory mounting experience.
Let's say you need to carry some oddly shaped cargo boxes, but the slats don't line up properly and you can't secure the boxes to the rack. Well, no worries, just loosen the slats from the side panels, and move them backwards or forwards as to allow the mounting points to line up with the boxes!
Plan to carry a roof top tent and you aren't sure it's as sturdy and safe as you want it to be? Get an extra crossbar and quickly add it over the rack, to make sure the tent is sitting over more of these crossbars.
Or if you're a bit tired and don't want to climb onto the rack to remove an accessory, just remove the crossbars (slats) from the side of the rack altogether. You can then lift the specific slat and in less than 5 minutes, without climbing anywhere, you're good to go.
Lightweight & Low Profile
The Prinsu roof rack for Rav4 is an incredibly lightweight rack, weighing just under 46 lbs, thanks a to a fully high grade aluminum construction. But don't let the weight fool you, this roof rack has a 1000 lbs static weight capacity, allowing you to mount anything you can imagine over it.
Worried about the noise it can make as you drive? Don't. This rack comes not only with a noise reducing trim on the sides, but also a wind deflector to make it more aerodynamic, and quiet of course.
On top of that, the Rav4 Prinsu roof rack is one of the lowest profiled racks in the market. Meaning, you can park anywhere, even underground parking lots or your garage. It adds less than 2.4" to the height of your vehicle!
Prinsu Roof Rack Toyota Rav4 Features:
- Fits the 2019–current Toyota Rav4
- Made In USA
- High grade aluminum construction.
- Powder coated in a satin black texture (except for wind deflector crossbar), and ready to assemble.
- Redesigned crossbars with a 44" strength increase & built-in drop points for easy mounting.
- Low-profile design with noise reducing trim to prevent wind resistance & noise.
- Fully modular design for easy customization & accessory installation.
- 600lbs dynamic load capacity and 1,000lbs static load capacity.
Prinsu Rav4 Roof Rack Dimensions:
| Installed Weight | 45.75 lbs |
| Overall Length | 72.50" |
| Side Rail Height (as measured at the center of rail) | 2.4125" |
| Height Added (as measured from the center of the roof) | 2.375" |
| Clearance Between Roof & Rack | 1.375" | Width | 47" | Static Load Rating | 1000 lbs |
| Dynamic Load Rating | 600 lbs |
Prinsu Roof Rack Rav4 Install Manual:
Download the Prinsu Rav4 Roof Rack Installation Manual HERE.
Get the latest updates and exclusive offers here!
INFO & POLICIES
QUICK LINKS
© 2024, Off Road Tents®. All Rights Reserved.
- |
- |
