Westcott Designs
Westcott Designs: Modular Roof Racks, Bed Racks, Hatch Ladders & Chase Racks
Westcott Designs is a family-run American manufacturer, and we carry the range at Off Road Tents for people who want a rack designed around their exact vehicle rather than adapted to fit it. Our Westcott Designs selection covers modular and low-profile roof racks across Toyota, Lexus, Ford and GM platforms, steel bed racks, rear hatch ladders, rock sliders, and a desert-truck line of chase racks and pre-runner bumpers. Give us a call at 844-200-3979 and we'll match the right Westcott setup to your build.
📋 Quick Navigation
Who Is Westcott Designs?
Westcott Designs is a family owned business run by Jeff and Jessica Westcott, a husband and wife team who spent years working with aftermarket automotive parts before deciding they could build better ones themselves. That origin shows in the products. Everything is designed and made in the USA, and the details are the kind you only add when you actually use the gear: a bottle opener machined into the side of the rack, floor inserts you can stand on, wind deflectors shaped to kill highway noise rather than just look aggressive. It is a small operation making considered products rather than a catalog brand filling shelf space.
The roof racks are the heart of it, and they split into two approaches. The Modular racks give you crossbars you can slide, add or remove as your load changes, plus an optional cutout in the wind deflector for an LED light bar. The Lo-Pro racks go the other way, trading the light bar cutout for the slimmest, lightest profile available. Both share the same construction: black powder coated aluminum with stainless steel hardware, no drilling required to install, and, crucially, full sunroof compatibility. That last point matters more than people expect, because plenty of racks quietly block a panoramic roof.
Beyond racks, the catalog reaches further than most rack brands. Steel bed racks that sit below cab height so they stay aerodynamic even loaded. Rear hatch ladders that bolt to an SUV tailgate so you can get up to your gear safely instead of climbing a tire. Rock sliders. And a genuinely different line for desert trucks: modular chase racks and pre-runner front bumpers built for high-speed Ford Raptor use. Westcott's own catalog covers more platforms and products than we stock, so if you do not see your vehicle here it is worth a call. What we carry at Off Road Tents spans the roof racks, bed racks, ladders, sliders and Raptor gear our customers build with most.
Featured Westcott Designs Products
A representative slice of the Westcott range, from the Lexus and Toyota roof racks through the bed racks and hatch ladders to the Raptor desert line. The full collection runs deeper across more vehicles.
Westcott Designs Lexus GX470 Modular Roof Rack
Price: $975
Type: Modular platform roof rack, aluminum no-drill rack | Fits: Lexus GX470
The GX470 is one of the great overland platforms and badly underserved for quality racks, which makes this one worth knowing about. It is a full modular platform cut for the GX roofline, with crossbars you can reposition or remove, an optional light bar cutout in the wind deflector, and no drilling to install. Black powder coated aluminum with stainless hardware. Best pick for GX470 owners who want a rack actually engineered for their truck.
Standout features: Purpose-built for the Lexus GX470 • Modular crossbars you can move or remove • Optional LED light bar cutout • No-drill install, sunroof compatible • Powder coated aluminum with stainless hardware
Westcott Designs 5th Gen 4Runner Modular Roof Rack
Price: From $899
Type: Modular platform roof rack, lightweight aluminum | Fits: Toyota 4Runner 5th Gen
At 46.7 lbs this is one of the lightest full platforms you can put on a 5th gen 4Runner, and it is specifically engineered around panoramic sunroofs, so you can remove the crossbars over the glass and still use it. Optional light bar cutout, optional floor inserts to expand cargo space, no drilling, and the signature bottle opener machined into the side. Best pick for 5th gen 4Runner owners who want light weight and sunroof access.
Standout features: Just 46.7 lbs, among the lightest available • Designed around panoramic sunroofs • Removable and repositionable crossbars • Optional light bar cutout and floor inserts • Integrated bottle opener on the side rail
Westcott Designs 6th Gen 4Runner Lo-Pro Roof Rack
Price: From $995.95
Type: Low-profile roof rack, slim aluminum platform | Fits: Toyota 4Runner 2025 to current (6th Gen)
Cut for the all-new sixth-generation 4Runner rather than carried over from the previous truck, which is what you want on a fresh roofline. The Lo-Pro is Westcott's slimmest and lightest profile, sitting so close to the roof it reads as factory equipment while still carrying a rooftop tent. It skips the light bar cutout in exchange for that profile, though you can still mount lighting on top. Best pick for 2025-and-newer 4Runner owners who want the cleanest possible look.
Standout features: Engineered for the 2025+ 6th gen 4Runner • Lo-Pro is the slimmest, lightest profile • Blends into the roofline like factory equipment • Optional walkable floor inserts • No-drill install, sunroof compatible
Westcott Designs Land Cruiser Full-Length Modular Roof Rack
Price: $1,024.86
Type: Full-length modular roof rack, aluminum platform | Fits: Toyota Land Cruiser 2024 to current
A full-length platform for the new-generation Land Cruiser, using every inch of available roof rather than a partial basket. You get the complete modular system, crossbars you can reposition as loads change, optional light bar cutout, optional floor inserts, and a no-drill install that keeps the roof sealed. On a vehicle this significant, fitment quality is the whole point. Best pick for 2024-and-newer Land Cruiser owners building a full overland platform.
Standout features: Full-length coverage of the Land Cruiser roof • Modular repositionable crossbars • Optional light bar cutout in the wind deflector • No drilling, keeps the factory roof sealed • Designed and made in the USA
Westcott Designs Ford Raptor Modular Chase Rack
Price: From $2,199
Type: Chase rack, modular bed-mounted rack | Fits: Ford Raptor 2021-2026
Chase racks come from desert racing, where a truck needs lights up high, spares and gear secured, and a structure that survives being driven hard at speed. This is Westcott's take for the current Raptor, built modular so you configure it around lighting, tire carriers and gear rather than accepting a fixed layout. It is a serious piece of hardware for a serious truck. Best pick for Raptor owners running high-speed desert terrain who need elevated lighting and gear mounting.
Standout features: Desert-racing chase rack design • Modular configuration for lights and gear • Built for the 2021-2026 Ford Raptor • Elevated mounting for auxiliary lighting • Designed and made in the USA
Westcott Designs Ford Raptor Pre-Runner Front Bumper
Price: From $2,199
Type: Pre-runner front bumper, desert-style bumper | Fits: Ford Raptor 2021-2026
Pre-runner bumpers are built for a different threat than rock-crawling bumpers. Where a crawler bumper resists slow grinding impacts, a pre-runner is shaped for high-speed desert running, protecting the front end from whoops, brush and unexpected obstacles at pace while keeping weight and approach angle in check. Pairs naturally with the chase rack for a complete Raptor build. Best pick for Raptor owners who run fast open desert rather than technical rock.
Standout features: Pre-runner design for high-speed desert use • Front-end protection without crawler bulk • Built for the 2021-2026 Ford Raptor • Pairs with the Westcott Raptor chase rack • Designed and made in the USA
Westcott Designs 2nd & 3rd Gen Tacoma Bed Rack
Price: From $549.95
Type: Steel truck bed rack, low-profile, MOLLE compatible | Fits: Toyota Tacoma 2nd & 3rd Gen, 2005+
One of the more affordable quality bed racks made, and the low-profile design is the clever part: it sits below cab height, so it stays aerodynamic even loaded with a rooftop tent. Built from 11GA cold rolled steel, laser cut and TIG welded, with integrated tie-down points, MOLLE panel compatibility and no drilling required. Fits various Tacoma bed lengths. Best pick for Tacoma owners who want a strong, affordable, aerodynamic bed rack.
Standout features: Sits below cab height for better aerodynamics • 11GA cold rolled steel, laser cut and TIG welded • Integrated tie-down points • MOLLE panel compatible for more mounting • No drilling required to install
Westcott Designs 5th Gen 4Runner Rear Hatch Ladder
Price: $549
Type: Rear hatch ladder, SUV tailgate ladder | Fits: Toyota 4Runner 5th Gen, 2010+
The most affordable featured product here and the one that quietly fixes a daily annoyance. Once you have a loaded rack, getting up to it usually means climbing a tire or a door sill and hoping. This ladder bolts to the rear hatch and gives you a proper way up, with dual-layered 1 inch by 2 inch steps and powder coated aluminum construction. Safer, faster, and it has a bottle opener built in. Best pick for 4Runner owners who regularly access their roof rack.
Standout features: Safe, proper access to a loaded roof rack • Dual-layered 1 by 2 inch steps • Black powder coated aluminum • Mounts directly to the rear hatch • Most affordable featured Westcott product
Full Westcott Designs Comparison Table
Our featured Westcott Designs products side by side. The full collection covers many more vehicles, including Lexus GX460 and GX550, Sequoia, Tundra, RAV4, FJ Cruiser, Land Cruiser 200, and Chevrolet Tahoe and GMC Yukon.
| Product | Type | Fits | Price |
|---|---|---|---|
| Ford Raptor Modular Chase Rack | Chase rack | Ford Raptor 2021-2026 | From $2,199 |
| Ford Raptor Pre-Runner Front Bumper | Pre-runner bumper | Ford Raptor 2021-2026 | From $2,199 |
| Land Cruiser Full-Length Modular Roof Rack | Full-length modular roof rack | Land Cruiser 2024+ | $1,024.86 |
| 6th Gen 4Runner Lo-Pro Roof Rack | Low-profile roof rack | 4Runner 2025+ | From $995.95 |
| Lexus GX470 Modular Roof Rack | Modular roof rack | Lexus GX470 | $975 |
| 5th Gen 4Runner Modular Roof Rack | Modular roof rack | 4Runner 5th Gen | From $899 |
| 2nd & 3rd Gen Tacoma Bed Rack | Steel bed rack | Tacoma 2005+ | From $549.95 |
| 5th Gen 4Runner Rear Hatch Ladder | Rear hatch ladder | 4Runner 5th Gen, 2010+ | $549 |
Which Westcott Product Is Right for You?
Westcott covers several different jobs, so start with what you are trying to solve, then pick the tier within it.
Roof rack: Modular or Lo-Pro
This is the main decision, and it is a genuine trade rather than a good-better split. The Modular racks give you crossbars you can slide, add or remove as loads change, plus an optional cutout in the wind deflector so an LED light bar sits flush and protected. The Lo-Pro racks drop that cutout in exchange for the slimmest, lightest profile Westcott makes, sitting so tight to the roof they read as factory. Choose Modular if you reconfigure loads often or want integrated lighting. Choose Lo-Pro if a clean silhouette and minimum weight matter most, since you can still mount a light bar on top of the rack.
Driving a Lexus GX, or a full-size GM SUV
Worth calling out because these platforms are chronically underserved. Westcott builds racks for the GX470, GX460 and the new GX550, which is unusually thorough coverage for a vehicle family most rack brands treat as an afterthought. They also make a modular rack for the Chevrolet Tahoe and GMC Yukon, which almost nobody else does. If you drive one of these and have struggled to find a quality vehicle-specific rack, this is the brand to look at first.
You want to carry over the bed instead of the cab
The bed racks take a different approach from most: rather than towering above the cab, they sit below cab height, which keeps the truck aerodynamic even with a rooftop tent loaded up top. Construction is 11GA cold rolled steel, laser cut and TIG welded, with integrated tie-down points and MOLLE panel compatibility for expanding your mounting options. No drilling to install. Available for the 2nd and 3rd gen Tacoma and the 2022-and-newer Tundra, which fits both 5.5 foot and 6.6 foot beds.
You want safe access to a loaded rack
Underrated, and worth adding to any rack build. Once a rack is loaded with a tent and gear, getting up to it means climbing a tire, a door sill or a bumper, which is how people slip and how vehicles get dented. Westcott's rear hatch ladders bolt to the tailgate and give you proper dual-layered steps to climb, in powder coated aluminum. We stock them for the 4th and 5th gen 4Runner and the current Sequoia. If you access your rack regularly, this pays for itself the first time you do not fall off a tire.
You run a Raptor in fast desert terrain
This part of the catalog serves a completely different customer. The modular chase rack and pre-runner front bumper come out of desert racing rather than overlanding, built for trucks driven hard and fast across open terrain where you need elevated lighting, secure gear mounting and front-end protection shaped for speed rather than rock crawling. Both fit the 2021 to 2026 Raptor and are designed to work together. If your driving is fast desert rather than slow technical trails, this is the line for you.
The simple decision rule: Want repositionable crossbars and integrated lighting, take a Modular rack; want the slimmest, lightest profile, take a Lo-Pro. Driving a Lexus GX or a Tahoe or Yukon, Westcott is one of the few making a proper rack for you. Carrying over the bed, take the low-profile steel bed rack. Climbing to a loaded rack, add a rear hatch ladder. Running a Raptor fast in the desert, take the chase rack and pre-runner bumper.
Westcott Designs vs Other Brands
Westcott sits alongside several strong American rack makers we carry, and buyers cross-shop them constantly. Here is the honest comparison from stocking all of them.
Westcott Designs vs Prinsu: Both build vehicle-specific low-profile aluminum racks with no-drill installs, and both are excellent. Prinsu has the deeper catalog across Toyota and Jeep platforms and generally the lower price, which makes it the volume choice on those vehicles. Westcott's advantages are its Lexus GX coverage, which is unusually complete, its GM full-size SUV rack, and the surrounding product range of ladders, sliders and Raptor gear. For a Toyota or Jeep on a budget, Prinsu. For a Lexus GX or a Tahoe, or if you want ladders and racks from one maker, Westcott.
Westcott Designs vs Sherpa Equipment Co: Sherpa's roof rack catalog is larger, spans more platforms, and splits into Peak and Sport tiers with a quick-detach Jeep line Westcott does not match. Westcott counters with the Modular versus Lo-Pro choice, strong Lexus coverage, and a broader non-rack catalog including hatch ladders and desert-truck gear. For the widest roof rack selection and Jeep quick-detach, Sherpa. For Lexus GX fitment or a build that includes a ladder and sliders, Westcott.
Westcott Designs vs upTOP Overland: Two similarly sized American manufacturers with overlapping Toyota coverage. upTOP's strength is its bed rack line engineered to work alongside tonneau covers and caps, plus a modular tray bed. Westcott's is its roof rack breadth across Lexus and GM, the hatch ladders, and the Raptor chase rack and bumper. For a bed-focused truck build that keeps a tonneau working, upTOP. For roof-focused builds on less common platforms, or desert Raptor gear, Westcott.
Westcott Designs vs universal-fit racks: Said plainly, a universal crossbar system costs far less and carries light loads fine. What it cannot do is match your roofline, mount cleanly at factory points without drilling, preserve sunroof function, or carry the ratings a loaded rooftop tent needs, and it usually brings wind noise. For occasional light cargo, universal is fine. For a permanent platform that looks right and lasts, Westcott's fitment and construction is what you are paying for.
Frequently Asked Questions
What is the difference between Westcott Modular and Lo-Pro roof racks?
The Modular racks are built around adaptability, with crossbars you can slide, add or remove as your load changes, and an optional cutout in the wind deflector so an LED light bar sits flush and protected. The Lo-Pro racks give up that light bar cutout in exchange for the slimmest and lightest profile Westcott makes, sitting extremely close to the roof so the rack blends into the vehicle's lines. You can still mount a light bar on a Lo-Pro, it just sits on top of the rack rather than recessed into the deflector. Both use the same black powder coated aluminum with stainless steel hardware, install without drilling, work with your sunroof, and accept optional floor inserts.
Will a Westcott Designs roof rack block my sunroof?
No, and this is one of the things Westcott deliberately engineers for. Their racks are designed so you can continue operating your vehicle's sunroof without interference, which is not something every rack manages. The modular design helps here too: on vehicles with panoramic sunroofs, such as the 5th gen 4Runner, you can remove the crossbars sitting over the glass and keep full access while retaining the rest of the platform. If your vehicle has a panoramic roof and you want to be certain about your specific configuration, call us at 844-200-3979 and we will confirm the layout before you order.
Do Westcott Designs racks require drilling to install?
No. Both the roof racks and the bed racks are designed to install without drilling or permanent modification to your vehicle. On the roof racks that matters for a practical reason beyond convenience: drilling into a roof creates holes that can leak, and a no-drill install keeps the factory seal intact. The bed racks likewise mount without drilling into your truck bed. That also means the hardware comes off cleanly if you sell the vehicle. Fitment details can vary by platform, so tell us your exact year, make, model and body style and we will confirm the installation method for your specific product.
Can you mount a rooftop tent on a Westcott Designs rack?
Yes. Westcott's roof racks are built to carry a rooftop tent along with the people sleeping in it, and the bed racks are rated for tent use as well. The bed racks have a particular advantage here: because they sit below cab height rather than towering over it, the truck stays aerodynamic even with a tent mounted, which helps with both wind noise and fuel economy. What matters when pairing is the tent's weight against the rack's dynamic rating for driving and its static rating for sleeping parked. Tell us which rack and which tent you are considering and we will confirm the combination works before you buy.
What is a chase rack, and how is a pre-runner bumper different?
Both come from desert racing rather than overlanding. A chase rack mounts in the truck bed and rises behind the cab, originally so chase trucks supporting race vehicles could carry elevated lighting, spares and gear where they were visible and accessible at speed. A pre-runner bumper is front-end protection shaped for high-speed desert running, guarding against whoops, brush and sudden obstacles taken at pace, which is a different job from a rock-crawling bumper built to resist slow grinding impacts. Westcott builds both for the 2021 to 2026 Ford Raptor and they are designed to work together. If your driving is fast open desert rather than technical rock, this is the gear built for it.
Why Buy Westcott Designs from Off Road Tents
We are an authorized Westcott Designs dealer, so every rack, ladder and bumper we sell is genuine and carries full manufacturer support. Westcott is a small family operation making considered products, and buying through an authorized dealer is what keeps you connected to that support rather than gambling on a listing from an unknown seller.
Fitment questions are where Westcott buyers actually need help, and those are what we answer every day. Modular or Lo-Pro for how you load and whether you want integrated lighting? Which rack fits your exact generation, especially on platforms that recently changed like the 4Runner and Land Cruiser? Will it clear your panoramic sunroof in the configuration you want? Which rooftop tent pairs safely with your rack's ratings? Do you want floor inserts for extra cargo and a walkable surface? Should you add a hatch ladder now or later? Call us at 844-200-3979 before you order and we will get the whole combination right the first time.
We also carry Westcott alongside every other serious rack brand we stock, which means we can give you a straight answer instead of a pitch. If you are weighing Westcott against Prinsu, Sherpa or upTOP for your specific vehicle and budget, we will tell you honestly when another brand fits your build better. Sometimes it does, and sometimes Westcott is the only one making a proper rack for what you drive. We would rather get you the right one once.
Related Collections
All Roof & Bed Racks
Every rack brand we carry in one place. The best way to compare Westcott's fitment and construction against the other American makers.
Lexus Accessories
Everything we carry for the GX and LX platforms. Westcott's GX rack coverage is among the most complete you will find anywhere.
Truck Bed Racks
The full bed rack range across every brand. Compare Westcott's below-cab-height steel design against the taller aluminum alternatives.
All Roof Top Tents
The rack is the foundation, the tent is the reason. Check tent weight against your rack's ratings before pairing them.
Not Sure Which Westcott Setup Fits Your Rig?
Tell us your exact year, make, model and body style, whether you have a sunroof, and what you plan to carry. We'll match you to the right Modular or Lo-Pro rack, confirm the fitment and sunroof clearance, and spec the ladder, bed rack or accessories that actually make sense for your build.
