Westcott Designs 2021-2026 Ford Raptor Modular Chase Rack

SKU: 99300-RR

Ford Raptor chase rack rear three-quarter view with recovery gear mounted

3rd gen Ford Raptor bed rack system driver side angle

2021-2026 Raptor modular chase rack passenger side view

Ford Raptor chase rack MOLLE panel detail with mounted accessories

Raptor bed rack stainless steel track system close-up

Ford Raptor chase rack dual spare tire configuration overhead

Westcott Designs Raptor chase rack fuel can bracket system

3rd gen Raptor modular bed rack bolt-on mounting detail

Ford Raptor chase rack base frame raw finish close-up

2021-2026 Ford Raptor bed rack MOLLE panel removable design

Raptor chase rack tire mounting bracket detail

Ford Raptor modular chase rack stainless track wear protection

Westcott Designs Raptor bed rack gas can tie-down mount

Ford Raptor chase rack rear view with dual spare tires loaded

3rd gen Raptor chase rack installed in truck bed overview

2021-2026 Raptor modular chase rack MOLLE gear mounting

Raptor chase rack single spare tire configuration view

Ford Raptor off-road rack bed mounting points detail

Westcott Designs Raptor chase rack powder coat finish detail

Ford Raptor bed rack with fuel cans and recovery equipment

3rd gen Raptor modular chase rack crossbar detail

Ford Raptor chase rack structural frame close-up

2021-2026 Ford Raptor bed rack hardware and fastener detail

Raptor chase rack full build rear angle with accessories

Ford Raptor modular chase rack overhead bed view

Westcott Designs Raptor bed rack stainless track longevity detail

Ford Raptor chase rack lifestyle shot on built Raptor

3rd gen Ford Raptor with Westcott Designs chase rack full build

2021-2026 Ford Raptor Westcott Designs full build front to rear

Ford Raptor Westcott Designs bumper and chase rack complete build

Westcott Designs 2021-2026 Ford Raptor Modular Chase Rack

SKU: 99300-RR

$2,199.00

Raw

Black Powder Coat

Base Rack Finish

Raw

Black Powder Coat

MOLLE Panel Finish

$2,199.00

Call Our Experts: (844) 200-3979

Easy Financing

60 Days Returns!

Safe & Secure Checkout

Call Our Experts: (844) 200-3979

Easy Financing

60 Days Returns!

Safe & Secure Checkout

The Ford Raptor Chase Rack Designed for Builds That Actually Get Used

If you're building a 2021-2026 Ford F-150 Raptor for desert support, overland expeditions, or Baja-inspired functionality, the bed is where everything happens. That's where your spare tires live, your fuel cans ride, your recovery gear stays accessible, and your chase lights keep the truck behind you informed. You need a Ford Raptor chase rack that handles all of it without locking you into a single configuration.

The Westcott Designs Modular Chase Rack is a fully configurable Ford Raptor bed rack system purpose-built for the 3rd gen Raptor platform (2021, 2022, 2023, 2024, 2025, and 2026 model years). It supports single or dual spare tire setups, includes removable MOLLE panels for gear mounting, features corrosion-resistant stainless steel tracks in high-wear areas, and includes a removable fuel can base bracket system. This isn't a static bed rack you bolt on and forget. It's a modular Raptor chase rack that adapts as your build evolves.

Whether you're running high-speed desert terrain, loading out for a multi-day overland trip, or building a competition-ready chase vehicle, this 2021-2026 Raptor chase rack delivers the versatility and durability to handle it.

Single or Dual Spare Tire Setup - Your Ford Raptor Bed Rack, Your Call

One of the biggest advantages of this Raptor modular chase rack is the ability to switch between spare tire configurations without swapping out the entire rack.

Single Spare Tire Configuration

The single spare setup keeps things lightweight and maintains better rear visibility. It's the right F-150 Raptor chase rack configuration for daily-driven Raptors, recreational off-roaders, and builds that don't need the added weight of a second full-size spare. You still get the aggressive chase rack look and full MOLLE panel functionality - just with a cleaner, lighter profile.

Dual Spare Tire Configuration

This is the desert-ready setup. Running two full-size spares is standard practice for Baja-style chase trucks and serious off-road support vehicles. The Raptor dual spare tire rack configuration is optimized for weight distribution across the bed, and it turns your Raptor into a true chase vehicle capable of supporting extended runs deep into remote terrain. If you're building a Ford Raptor desert chase rack setup for race support or expedition use, dual spares give you the redundancy that matters when the nearest tire shop is 200 miles away.

The system allows you to switch between single and dual configurations as your needs change - no permanent commitment to either setup.

Removable MOLLE Panels for Serious Gear Mounting

The included MOLLE panels are one of the standout features of this Ford Raptor chase rack. MOLLE (Modular Lightweight Load-carrying Equipment) is the same attachment standard used in military and tactical applications, and it gives you an incredibly versatile mounting surface on both sides of the rack.

Use them to mount recovery gear, fire extinguishers, tools, first aid kits, fuel packs, communication equipment, or any MOLLE-compatible accessory. The panels are fully removable - bolt them on for overland trips and expedition builds, pull them off for a cleaner look when you're back to daily driving. This quick reconfiguration capability is what makes this a truly modular Raptor bed rack rather than a fixed system.

Both the base rack and MOLLE panels are available in raw or black powder coat finishes, so you can mix and match to suit your build aesthetic.

Removable Fuel Can Base Bracket System Included

The chase rack comes with a dedicated fuel can mounting system built in. The included dual gas can tie-down mount and dual gas can base bracket give you a secure, purpose-built platform for carrying extra fuel - a critical feature for any serious Raptor off-road rack build.

The bracket system is fully removable. Run it loaded with fuel for desert runs and long-distance overlanding, then pull the brackets off cleanly when you don't need the extra capacity. This flexibility means the rack works just as well for a weekend trail run as it does for a 500-mile Baja support mission.

Stainless Steel Track System - Why This Raptor Chase Rack Won't Rust

One of the most common failure points on powder-coated chase racks is wear in high-contact areas. Every time you slide a tire, strap a fuel can, or adjust mounted gear, you're grinding through the powder coat. Once that coating wears through on a standard steel rack, corrosion starts - and it spreads fast, especially in desert dust, coastal salt air, or wet winter conditions.

Westcott Designs solved this by incorporating a stainless steel track system in the key wear zones. The stainless tracks resist abrasion without relying on a sacrificial coating. The result is a Ford Raptor bed rack that maintains its structural integrity and appearance long after competitors start showing rust. This is the kind of detail that separates a purpose-engineered 3rd gen Raptor chase rack from a generic bed rack with a fresh coat of powder.

Key Features of This F-150 Raptor Chase Rack

Fully modular design supporting single or dual spare tire configurations
Removable MOLLE panels for tools, recovery gear, fuel packs, and accessories
Removable fuel can base bracket system with dual gas can tie-down mount included
Corrosion-resistant stainless steel track system in high-wear areas
Bolt-on installation to the truck bed - no drilling or permanent modification
Designed for full-size Raptor spare tires
Compatible with factory 37" Performance Package trucks
Base rack and MOLLE panels each available in raw or black powder coat
Purpose-built for the 2021-2026 Ford F-150 Raptor (3rd Gen / P702 platform)
Made in the USA by Westcott Designs
Limited lifetime warranty

Technical Specifications

Vehicle Fitment	2021-2026 Ford F-150 Raptor (3rd Gen / P702)
Mount Location	Truck bed
Design	Modular chase rack
Tire Configuration	Single or dual full-size spare capable
Panel System	Removable MOLLE panels (included)
Fuel System	Removable dual gas can base bracket and tie-down mount (included)
Track System	Stainless steel anti-wear tracks
Base Rack Finish	Raw or Black Powder Coat
MOLLE Panel Finish	Raw or Black Powder Coat
Installation	Bolt-on
37" Tire Compatible	Yes
SKU	99300
Lead Time	6-8 weeks
Warranty	Limited Lifetime Warranty
Country of Origin	USA

What's in the Box

Modular chase rack base frame (raw or powder coated based on selection)
Removable MOLLE panels (raw or powder coated based on selection)
Dual gas can base bracket
Dual gas can tie-down mount
Stainless steel track components
Bolt-on installation hardware and instructions

Pros and Cons

Pros

True modular design lets you switch between single and dual spare tire setups as your build evolves - no need to buy a separate rack for each configuration
Stainless steel tracks in high-wear areas eliminate the powder coat wear and rust problem that plagues most competitor Ford Raptor bed racks
Included MOLLE panels and fuel can bracket system mean you're not buying essential accessories separately on top of the rack price
Bolt-on installation keeps the truck bed intact with no drilling or permanent modifications required

Cons

At $2,199-$2,399, this is a premium Raptor chase rack - but the modular design, stainless tracks, and included accessories justify the investment over cheaper fixed-design alternatives
Spare tires, fuel cans, and MOLLE-mounted accessories are sold separately - the rack provides the platform, not the cargo

Frequently Asked Questions About This Ford Raptor Chase Rack

Does this 2021-2026 Raptor bed rack fit the 2025 and 2026 models?

Yes. This chase rack is designed for all 2021 through 2026 3rd gen Ford F-150 Raptor models. The bed dimensions and mounting points are consistent across the entire 3rd gen production run.

Can I run two full-size spare tires on this Raptor chase rack?

Yes. The modular system supports both single and dual spare tire configurations. You can switch between setups as your build needs change without replacing the rack.

Are the MOLLE panels removable on this Ford Raptor bed rack?

Yes. The MOLLE panels are designed to be quickly removed or repositioned. Run them for overland and off-road builds, pull them off for a cleaner daily look. The modular design gives you that flexibility.

Will this Raptor modular chase rack rust over time?

The stainless steel track system in high-wear areas is specifically designed to prevent the powder coat wear and corrosion that affects most chase racks. The stainless components resist abrasion and corrosion without relying on a sacrificial coating.

Is this Ford Raptor off-road rack compatible with the 37 Performance Package?

Yes. This chase rack is fully compatible with factory 37 Performance Package Raptors and aftermarket 37" tire setups.

Turn Your Raptor Into the Chase Truck It Was Meant to Be

Whether you're building for Baja support, overland expeditions, or just want the most capable and versatile Ford Raptor chase rack on the market, the Westcott Designs Modular Chase Rack delivers. Pick your finishes, choose your configuration, and start building.