Prinsu Toyota Sequoia Roof Rack 2023-Current
Prinsu Toyota Sequoia Roof Rack 2023-Current
SKU: PSRR1
Prinsu Toyota Sequoia Roof Rack 2023-Current
SKU: PSRR1
$1,130.50$1,330.00
Prinsu Toyota Sequoia Full Length Roof Rack 2023-Current
Check out the Prinsu Toyota Sequoia roof rack. It was made to fit the newest models of the Sequoia from 2023 up to the current version. This is a product that is essential for anyone who enjoys taking their car on off-road or overlanding adventures. It enables you to transport bulky equipment that wouldn't normally fit inside your car, such as kayaks, skis, motorcycles, extra luggage, jerry cans, numerous accessories, and even a roof top tent for extended overlanding journeys.
Idaho-based Prinsu Design Studio is a well-known business. All of their dependable, high-quality roof racks are produced in the USA. There is a Limited Lifetime Warranty included with this platform roof rack. You may be confident that the quality you'll receive is excellent and, to be honest, difficult to even match. With that said let's talk more about this Toyota Sequoia roof rack.
Best Prinsu Roof Rack Sequoia
There are a lot of features that make this the best Prinsu roof rack for Toyota Sequoia so let's get to it. This Prinsu rack has a sturdy 1/4" thick 5052 aluminum construction with a black powder coat that will prevent any chipping, scratches, and even erosion when going through muddy terrain, Thanks to the aluminum construction this roof rack is both incredibly strong yet very lightweight.
As we said, this rack is very strong as it has a static weight capacity of 600+ lbs and it is also pretty light, weighing only 69 lbs! This Prinsu rack is perfect for mounting any larger and heavier load you may carry with you on your next overlanding adventure such as kayaks, bikes, skis, fuel or water canisters, extra luggage, or even a larger roof top tent.
This Toyota roof rack is also modular, which is an added bonus. They are made that way so that they may accommodate your lifestyle and hobbies. It comes with 10 crossbars for cargo and 1 additional which can be used to mount a wind deflector which will make your vehicle more aerodynamic or even a light bar that can illuminate the road when driving at night.
The aluminum crossbars also have drop-in points which make adding additional mounts and accessories a breeze. They also have a fore and aft channel, two bottom-facing channels, and two top-facing T-slot channels. This provides a wide range of options for cargo security, tie-down options, and the addition of any said additional equipment like tool mounts or illumination.
No Drill Roof Rack Sequoia
This Prinsu roof rack offers a lot of great features but what about its installation of it? Well, the great thing about Prinsu racks is that they do not require drilling in order to be installed on your vehicle. Now that's a good thing because installing it takes less time than racks that would require you to drill your vehicle and you also o not need to damage the said vehicle.
When drilling holes to mount a roof rack there is a possibility that you would create leakage points where water may come inside your car when it is raining or even snowing. With this non drill roof rack you don't have to worry about that. It is also a lot easier to remove it if you ever want to replace it or jut feel like you don't need it anymore.
All you need to do to install this rack is to assemble it first, of course, and then you should align the rack with the already existing holes in your vehicle and bolt the rack to the roof of your car. That shouldn't take more than an hour and after that, you are good to go.
Low Profile Prinsu Roof Rack Sequoia
Your car's fuel economy is increased by a low-profile roof rack. How? Well, anything hefty and aerodynamically inefficient protruding out of your car creates aerodynamic drag, which slightly reduces speed or raises gas mileage while you're trying to drive faster.
Given that it is only 2.5" in height, you may have already realized that this is also an extremely low-profile Toyota Sequoia roof rack. It will not have a significant impact on your gas tank because it is quite aerodynamic. It is available with a wind deflector, which will further reduce aerodynamic drag and result in less noise when driving.
Being so low profile has only one drawback—you can't actually store anything underneath the rack itself. Certainly nothing large and heavy. You could always fit a foldable camping table or another item of a comparable size below the rack because there is just a little over an inch of space between the roof of your car and the roof rack. To prevent it from sliding onto the road while you're driving, be sure to tighten it.
Toyota Sequoia Prinsu Rack Features
- Two-piece design
- No drilling required
- High-quality 1/4" thick 5052 aluminum plate construction
- 1/8" 5052 aluminum plate wind deflector to help with aerodynamics and prevent wind noise
- Crossbars with built-in drop points for easy mounting.
- Attaches to factory mounting in the middle and rear of the vehicle and via 3M VHB tape in the front
- Offers numerous solutions for tie-down options, cargo security, and the addition of accessories such as tool mounts or lighting
- Powder-coated black
- Lightweight - weighs 69 lbs
- Large platform area
- Modular design for maximum customization
- Installation instructions and mounting hardware are included
NOTE: Heretic 40" Lightbar can added in case you'd like to pair your Prinsu rack with an amazing and solid lightbar. Make sure to select yours when choosing the product's variants.
In case you'd like to have a full description of the lightbar, here it is:
Heretic 40" Slim Single Row LED Lightbar. Click HERE
*** Includes a noise reducing trim for better airflow and less noise while driving ***
Prinsu Toyota Sequoia Roof Rack Dimensions
Weight | 69 lbs |
Height | 2,5" |
Length | 103.5" |
Width | 52,25" |
Static Weight Capacity | 600+ lbs |
Dynamic Weight Capacity | 300 lbs |
Toyota Sequoia Prinsu Rack Install
Take a look at the Installation instruction for Prinsu roof rack for Toyota Sequoia HERE!
Related Products
View all
Front Runner
Front Runner Load Bar Kit for RSI Double Cab Canopy - 3 sizes
Thule
Thule Tepui Kukenam Explorer Series - 3 Person Roof Top Tent
Front Runner
Front Runner Bed Load Bars Kit For Toyota Tacoma (2005-Current)
Thule
Thule Tepui Autana Ruggedized - 3 Person Roof Top Tent - Annex Included
Cali Raised LED
Cali Raised LED 42" Slim Single Row LED Light Bar - White
GOBI
GOBI Stealth Roof Rack for Toyota 4Runner 5th Gen w/ LED Lightbar Set Up