Leitner Designs Active Cargo System For International Trucks
Your international-market truck deserves the same premium bed rack quality as domestic vehicles. The Leitner Designs ACS FORGED International Fit delivers exactly that—a no-drill solution engineered specifically for non-USA trucks with 1.5-meter beds. Whether you're running a Toyota Hilux bed rack, Ford Ranger bed rack, Chevrolet Colorado bed rack, Mitsubishi Triton bed rack, Volkswagen Amarok bed rack, or Isuzu D-Max bed rack, this system provides professional-grade cargo capacity.
Built in Corona, California, the Leitner ACS represents five years of development and hundreds of thousands of off-road miles of testing. This international bed rack isn't some afterthought adaptation—it's precision-engineered for the specific bed dimensions and mounting requirements of popular international-market trucks.
The Leitner bed rack fits a wide range of global-market pickup trucks, giving international customers access to the same legendary quality and durability that made Leitner Designs a trusted name in North America.
What Is The Leitner Designs ACS FORGED International?
The ACS FORGED International represents Leitner's next-generation Active Cargo System adapted specifically for international-market trucks with 1.5-meter beds. It builds on the proven foundation of the North American ACS while incorporating engineering adjustments for global truck specifications.
This international bed rack features the same single-piece aluminum alloy uprights that eliminate weak points common in welded designs. Paired with custom Grade 10.9 alloy steel fasteners, you get a system built to handle serious punishment regardless of where in the world you're driving. Every bolt features a black Zi-Ni coating and comes pre-treated with Loctite.
The NDNS (No Drill, No Slide) configuration means this Toyota Hilux bed rack or other international variant bolts to your truck's existing mounting points without drilling. The rear load bar remains fixed rather than sliding, making it perfect for permanent rooftop tent installations or gear carriers.
Leitner Bed Rack Key Features
No-Drill Installation
The Leitner Designs bed rack preserves your truck's bed integrity completely. By utilizing factory mounting points, you avoid drilling holes that could compromise structural integrity or create leak points. This is especially important for international-market trucks where warranty coverage may vary by region.
Aircraft-Grade Aluminum Construction
At just 85 pounds, this international bed rack won't bog down your Toyota Hilux, Ford Ranger, or Volkswagen Amarok. The aluminum alloy construction delivers exceptional strength while keeping weight minimal for better fuel economy and improved handling.
Professional-Grade Fasteners
Every fastener in this Mitsubishi Triton bed rack system is purpose-built for the ACS FORGED. The Grade 10.9 rating exceeds standard hardware strength, while the black Zi-Ni coating provides exceptional corrosion protection—crucial for international markets with varying climate conditions.
Quad-Rail Load Beam Design
The heavy-duty 2.0-inch square load bars feature four T-slot channels—two on top, one fore-aft, and two on the bottom. This quad-rail design on your Ford Ranger bed rack or other international application gives you unlimited mounting options for accessories and tie-downs.
Universal Accessory Compatibility
Your Leitner bed rack works with Thule, Rhino-Rack, and Yakima accessories. These brands are available globally, so you can source compatible accessories in your region without compatibility concerns.
DECKED System Compatible
If DECKED drawer systems are available in your market, the Leitner Designs ACS FORGED mounts perfectly above them. You get organized drawer storage below and massive cargo capacity above.
Optional GearPod Storage
Leitner's patented GearPods (US Patent 10259508) add locking, weather-resistant storage within easy reach. These aerodynamic boxes follow your truck's body lines to minimize wind noise while keeping tools and valuables secure.
Leitner Designs ACS Specifications
Specification
Details
Weight
85 lbs (38.6 kg)
Height from Bed Caps
23 inches (584 mm)
Load Bar Size
2.0" square (50.8 mm)
Material
Aluminum alloy
Fasteners
Grade 10.9 black Zi-Ni coated
Off-Road Dynamic Capacity
400 lbs (181 kg)
On-Road Dynamic Capacity
800 lbs (363 kg)
Static Capacity (Parked)
1,400 lbs (635 kg)
Finish
Dual-stage powder coated
Manufacturing
Corona, California, USA
Patent
US Patent 9586629
Weight Capacity Explained
The Leitner bed rack offers three different weight ratings for different use scenarios, ensuring safe operation of your international bed rack regardless of your location.
The off-road dynamic rating of 400 pounds (181 kg) applies during active off-road driving on trails, rough terrain, or unpaved roads. This conservative rating ensures everything stays secure when your Toyota Hilux bed rack is bouncing over obstacles.
The on-road dynamic rating of 800 pounds (363 kg) doubles your capacity for highway and paved road use. This rating works perfectly for long-distance travel with bikes, cargo boxes, or camping gear mounted on your Chevrolet Colorado bed rack.
The static rating of 1,400 pounds (635 kg) applies when parked at camp. This massive capacity easily handles even the heaviest rooftop tents available globally. You can sleep comfortably in your tent without worrying about stressing the rack.
International Bed Rack Installation
Installing the Leitner Designs ACS on your international truck is straightforward thanks to the no-drill design. You won't need specialized tools, welding equipment, or fabrication skills. Just basic hand tools and a couple of hours.
Start by positioning the side rails over your truck's factory bed mounting points. Leitner's precision laser-cutting ensures alignment with 1.5-meter bed specifications. Secure the rails using the provided stainless steel mounting hardware.
Once the rails are secured, slide the crossbars into the side rail channels. Position them based on your cargo needs—closer together for smaller items, farther apart for rooftop tents.
Most installations take 2-4 hours depending on experience level and accessories. Leitner provides comprehensive instructions with every rack.
Important Note: Since this is designed for 1.5-meter beds, verify your specific truck bed length before ordering. The rear load bar does not slide on this configuration.
Modular Design Benefits
The Leitner ACS shines through its modular design. Unlike welded racks with fixed crossbar positions, this international bed rack lets you customize crossbar spacing for any cargo situation.
Mounting a rooftop tent? Position crossbars according to the manufacturer's specifications. Hauling bikes? Space them to support the wheels properly. Carrying equipment or supplies? Adjust the spacing to maximize support and stability.
The T-slot channels in every crossbar accept standard T-nuts and bolts, making it simple to attach custom mounts, light brackets, or tie-down points exactly where needed. This flexibility means your Ford Ranger bed rack or other international setup evolves with your needs.
Compatible International Trucks
The Leitner Designs ACS FORGED International Fit is specifically engineered for non-USA-manufactured trucks with 1.5-meter (approximately 59 inches) beds:
Toyota Hilux Bed Rack: All 1.5M bed variants globally
Ford Ranger Bed Rack (T6): International T6 Ranger with 1.5M bed
Chevrolet Colorado Bed Rack (MY16): International-market Colorado from model year 2016 onwards with 1.5M bed
Mitsubishi Triton Bed Rack: All Triton models with 1.5M bed
Volkswagen Amarok Bed Rack: All Amarok variants with 1.5M bed
Isuzu D-Max Bed Rack: D-Max Dual Cab with 1.5M bed
This universal fitment approach means one SKU (00-58FIA-1464) works across multiple manufacturers, simplifying ordering for international customers.
Compatible Accessories
The Leitner bed rack transforms your international truck into a true adventure platform. Rooftop tents from global brands like CVT, Roofnest, iKamper, Tepui, and regional manufacturers mount directly to your Toyota Hilux bed rack or other international setup. The 1,400-pound (635 kg) static capacity handles even the largest tents.
Bike racks, kayak carriers, and cargo boxes from Thule, Yakima, and Rhino-Rack integrate seamlessly. These brands operate globally, making it easy to source compatible accessories in your region for your Volkswagen Amarok bed rack or other configuration.
Recovery equipment, off-road lighting, jerry can holders, and tool mounts all find easy mounting points on your Mitsubishi Triton bed rack or other international application. The modular design lets you configure everything exactly how you need it.
Leitner's own accessory ecosystem, including GearPods and light mounts, works with this international bed rack just like North American applications.
Pros & Cons
Pros:
No-drill installation preserves truck bed integrity across multiple brands
Lightweight aluminum construction maintains fuel economy
Industry-leading 1,400-pound (635 kg) static capacity
Single SKU fits multiple international truck brands with 1.5M beds
Cons:
Rear bar does not slide like some North American variants
Limited to trucks with 1.5-meter bed length specifically
Why Choose Leitner Designs?
Leitner Designs extends its proven quality to international markets, giving global customers access to the same engineering excellence that made the brand famous in North America. The ACS FORGED isn't watered down for international markets—it's the same premium construction and materials.
American manufacturing in Corona, California ensures consistent quality control regardless of destination market. The limited lifetime warranty applies internationally, demonstrating Leitner's commitment to global customers.
Compare this to locally-manufactured alternatives that may use inferior materials or lack the extensive real-world testing that went into the Leitner bed rack design.
Frequently Asked Questions
Which international trucks does this rack fit?
This rack fits Toyota Hilux, Ford Ranger (T6), Chevrolet Colorado (MY16), Mitsubishi Triton, Volkswagen Amarok, and Isuzu D-Max trucks with 1.5-meter beds.
How do I measure my bed to confirm 1.5M?
Measure the interior bed length. This rack is designed specifically for 1.5-meter (approximately 59 inches) beds common on international-market trucks.
Does the rear bar slide?
No. The International Fit version has a fixed rear bar (No Slide). This is indicated by the NDNS designation. It's ideal for permanent rooftop tent installations.
Can I install this myself?
Yes. The bolt-on design requires only basic hand tools. Most installations complete in 2-4 hours. Leitner provides comprehensive instructions with every international bed rack.
Is this the same quality as North American racks?
Absolutely. This is manufactured in the same Corona, California facility using the same materials, processes, and quality control as all Leitner Designs products.
