Prinsu Quick Release Awning Mount Brackets 2.0

SKU: QRAM2-PS

Quick Release Awning Mount Bracket 2.0 close-up showing twist-lock spring plunger

Prinsu Quick Release Awning Mount 2.0 welded steel construction detail

Quick Release Awning Mount Brackets 2.0 installed on Prinsu Pro roof rack

Prinsu awning mount bracket lockable security feature view

270 degree awning mounted via Prinsu Quick Release Awning Mount 2.0

Prinsu Quick Release Awning Mount 2.0 textured black powder coat finish

Awning mount bracket spring plunger engagement detail

Prinsu Quick Release Awning Mount Brackets 2.0

SKU: QRAM2-PS

$1,098.90

Passenger's Side

Driver's Side

Side

$1,098.90

Call Our Experts: (844) 200-3979

Easy Financing

60 Days Returns!

Safe & Secure Checkout

Call Our Experts: (844) 200-3979

Easy Financing

60 Days Returns!

Safe & Secure Checkout

Prinsu Quick Release Awning Brackets - Tool-Free Awning Setup in Under a Minute

If you have ever wrestled an awning off your rack at the trailhead, you already know the problem. Bolts. Wrenches. A second person to hold the load. Twenty minutes of fiddling when all you want to do is get camp set or get rolling. The Prinsu Quick Release Awning Mount Brackets 2.0 fix that. This is the quick release awning mount system that drops your awning off (or back on) in under a minute, by yourself, with zero tools after install.

We have run a lot of awning mounts over the years. Bolted, slotted, and strapped systems all work fine until you actually need to remove the awning. The Quick Release Awning Mount Brackets 2.0 is the first awning mount bracket setup we have used that genuinely lives up to the "quick release" name. Twist, lift, done.

How the Prinsu Quick Release Awning Mount 2.0 Changes Your Setup

The whole point of a quick release awning bracket is convenience without compromising strength. The 2.0 nails both. An integrated twist-lock indexing spring plunger holds the awning rock-solid while it is mounted, then releases cleanly when you need it gone. One person, one motion, and the awning plus mount assembly comes off as a complete unit.

That matters more than it sounds. If you daily-drive your overland rig, leaving an awning on the rack year-round adds wind noise, drag, and unnecessary weight. With this tool-free awning mount, you can pull the awning between trips and put it back when the next adventure comes. Garage clearance issue? Pop it off. Hitting the highway empty for a long haul? Pop it off.

Built for Heavier 270 Degree Awnings

Earlier quick release systems on the market were limited to lighter pull-out awnings. The Prinsu Quick Release Awning Mount Brackets 2.0 was engineered specifically to support 270 awnings and other large-format units with confidence. The mounting geometry, plunger size, and welded steel structure are all dialed in for the higher loads a 270 degree awning bracket has to deal with under wind, rain, and trail vibration.

Whether you are running a hardshell, a Roam ARC 270, or another large overland awning, this awning mount bracket can carry it.

Heavy-Duty Construction You Can Trust

This is not a stamped or bent-metal bracket. The Prinsu awning mount is built from heavy-duty welded steel, then finished in a textured black powder coat. Steel takes the load. Powder coat takes the abuse. Together they hold up to UV, salt, dust, and the constant vibration of corrugated dirt roads without fading, flaking, or rusting through.

The lockable design adds another layer of protection. Standard locks (sold separately) thread directly through the mounting points, so when you walk away from camp the awning is not walking off with someone else.

Versatile Roof Rack Compatibility

The Quick Release Awning Mount Brackets 2.0 fits both Pro and Original Prinsu roof rack systems out of the box. If you already run a Prinsu rack, this is a direct bolt-on awning mount. The bracket interfaces with the rack via the standard 2 inch by 1 inch extrusion profile, which means it is also generally compatible with other Prinsu-style racks that use the same extrusion. Compatibility outside of Prinsu has not been formally tested, so check your rack manufacturer's specs before ordering if you are running something else.

Low-Profile Design That Stays Tight to the Rack

One of the small details that adds up to a clean install: the bracket sits low and tight against the rack profile. No gaps. No awkward standoffs. The awning tucks in close to the rack so your overland setup looks intentional rather than tacked on, and your highway noise stays manageable.

Quick Release Awning Mount Brackets 2.0 Specifications

Specification	Detail
Product	Prinsu Quick Release Awning Mount 2.0
Length	7.0 inches
Width	3.8 inches
Height	5.8 inches
Weight (per side)	~4 lbs
Weight (full pair)	8.2 lbs
Material	Heavy-duty welded steel
Finish	Textured black powder coat
Mount Type	Low Profile, Standard
Rack Compatibility	Prinsu Pro & Original (2 in x 1 in extrusion)
Lockable	Yes (locks sold separately)
Installation Time	Under 2 hours with standard tools
Warranty	Lifetime
Sold	Per side (Passenger or Driver)

Sold Per Side: How to Order

Every awning needs two mount brackets to attach to the rack: one on the passenger side, one on the driver side. We sell the Prinsu Quick Release Awning Mount Brackets 2.0 individually so you can replace a single damaged bracket, add to an existing setup, or build out a fresh pair. To mount one awning, add both the passenger side and driver side variants to your cart. Mounting two awnings (rare, but it happens on dual-rack builds)? Two of each.

What's in the Box (Per Side)

1x Quick Release Awning Mount Bracket 2.0 (welded steel construction)
Integrated twist-lock indexing spring plunger
Mounting hardware for Prinsu rack installation
Installation instructions

Pros & Cons

Pros

True tool-free awning removal and reinstall in under a minute
Heavy-duty welded steel rated for 270 awnings and large-format units
Lockable for security when the awning is on the rack
Lifetime warranty backs the build quality

Cons

Sold per side, so you will order two for a single awning install
Locks for the security feature are not included

Frequently Asked Questions

Will the Prinsu Quick Release Awning Mount 2.0 fit my non-Prinsu rack?

It is engineered for Prinsu Pro and Original roof racks. It will likely fit other Prinsu-style racks that use a 2 inch by 1 inch extrusion profile, but compatibility outside of Prinsu has not been formally tested. Confirm your rack's extrusion size before ordering, or reach out to us at offroadtents.com and we will help you check.

Can this awning mount bracket really hold a 270 degree awning?

Yes. The 2.0 was specifically engineered to handle 270 awnings and other heavier large-format units. The welded steel construction and indexing spring plunger are sized for the higher load a 270 degree awning puts on the mount.

How long does removing the awning actually take?

Under a minute, solo, no tools required after the initial install. Twist the spring plungers, lift the awning and bracket assembly off the rack, walk it to storage. Reinstall is the same process in reverse.

Do I need to buy two of these for one awning?

Yes. Each awning mounts at two points on the rack, so you will add the Passenger's Side and Driver's Side variants to your cart for a complete setup on one awning.

Is the Quick Release Awning Mount Brackets 2.0 lockable?

Yes. The bracket is designed to accept standard locks (sold separately) so you can secure your awning to the rack when it is mounted. Useful for trailhead parking, campgrounds, and overnight stops.

Get Your Quick Release Awning Mount Setup Dialed

The Prinsu Quick Release Awning Mount Brackets 2.0 is the upgrade that finally makes pulling your awning off as easy as the marketing always promised. Add the Passenger's Side and Driver's Side variants to your cart and get set up. Questions on rack compatibility, awning fitment, or anything else? Hit us up at offroadtents.com and we will get you sorted before you order.