Front Runner Slimline 3 Antenna Mount

SKU: RRAC1007

Front Runner antenna mount pivot mechanism in upright position

Slimline 3 antenna mount folded flat in stowed position

Antenna mount 30 degree pivot increment index pin detail

Front Runner Slimline 3 antenna mount clamping bracket detail

Slimline 3 antenna mount magnetic base plate component

Front Runner Slimline 3 Antenna Mount

SKU: RRAC1007

$99.95

Call Our Experts: (844) 200-3979

Easy Financing

60 Days Returns!

Safe & Secure Checkout

Call Our Experts: (844) 200-3979

Easy Financing

60 Days Returns!

Safe & Secure Checkout

Every antenna on a rack eventually meets a low branch, a parking garage, or a drive-through roof. The usual options are both bad: unbolt it every time, or hear the crack and hope it survived. This antenna mount gives you a third option, because the whole thing folds down in seconds and springs back up when you are clear.

This roof rack antenna mount secures to either side or the rear of your Slimline 3 rack and pivots a full 90 degrees forward or backward from upright, in 30 degree increments. An index pin drops the antenna down, and a clamping bracket holds it flat and secure when it is not in use. It takes fiberglass antennas under a metre, whip antennas, and magnetic base antennas, with a magnetic base included in the box. Built from black powder-coated 3CR12 stainless steel.

90° Total Pivot Range

30° Adjustment Increments

3 Mounting Locations

3.44 lbs Net Weight

Fold It Down Without Taking It Off

The pivot is the reason to buy this mount. It swings 90 degrees total, forward or backward from upright, and it indexes at 30 degree increments so it holds wherever you set it rather than flopping around.

Low Clearance

Garage, car park, drive-through, low branches. Pull the index pin, drop the antenna, carry on.

Dial In the Angle

Thirty degree steps let you rake the antenna back on the highway or set it upright for best reception at camp.

Stowed and Secured

The clamping bracket holds the antenna flat and firm when it is down, so it does not rattle or whip around on the move.

That last part matters more than it reads. Plenty of fold-down mounts drop the antenna but leave it resting loose against the rack, where it vibrates against the tray for a thousand miles. The clamping bracket is a proper hold, not a rest.

Three Places to Put It

The mount secures to either side of the rack or to the rear, and a rear mounting spacer comes in the box for that position.

That flexibility matters because antenna placement is not arbitrary. You may want it away from a rooftop tent that opens on one side, clear of an awning that deploys on the other, or at the back where it is furthest from the cab and least likely to foul anything. Being able to pick the side after the rest of the build is in place saves rethinking the whole layout around a radio.

What Antennas It Takes

As a CB antenna mount, a GMRS antenna mount or a ham radio antenna mount, it is built around the three common antenna styles rather than one brand's hardware.

Antenna Type	Notes
Fiberglass	Must be under 1 metre in length
Whip	Standard whip antennas
Magnetic Base	A magnetic base is included in the box

The magnetic base being supplied is worth noticing. It means a mag-mount antenna you already own has somewhere solid and grounded to sit, rather than being stuck to whatever flat panel you could find on the vehicle.

The one limit to respect is the 1 metre maximum on fiberglass antennas. Longer fiberglass whips put more leverage on the mount than it is built for. If you are running something taller, call us at 844-200-3979 before ordering.

Built From the Right Material

A roof rack antenna mount sits permanently exposed, carries something that whips about at 70 mph, and has a pivot joint that has to keep working after a few winters of salt.

It is made from 3CR12 stainless steel with a black powder coat, the same material and finish used across the Front Runner rack range. On a part with a moving joint and an index pin, corrosion resistance is not cosmetic: a seized pivot is a mount you stop using.

Stainless steel installation hardware and a fitment guide are included.

Specifications

Fits	Front Runner Slimline 3 roof racks, either side or the rear
Antenna Types	Fiberglass (under 1m), whip, and magnetic base
Pivot Range	90 degrees total, forward or backward from upright
Increments	30 degrees
Drop-Down	Index pin
Stowed Position	Clamping bracket holds the antenna securely
Magnetic Base	Included
Material	3CR12 stainless steel
Finish	Black powder coating
Hardware	Stainless steel, supplied
Product Dimensions	4.69" W x 3.2" H
Net Weight	3.44 lbs
SKU	RRAC1007

What's Included

1 x Mounting Bracket

1 x Antenna Mount

1 x Cover Bracket

1 x Magnetic Base

1 x Clamping Bracket

1 x Slat Bracket

1 x Rear Mounting Spacer

Stainless Steel Installation Hardware

Fitment Guide

📄 Installation Instructions

Download the fitment guide. It covers side and rear mounting, and all hardware is included.

Download PDF

Pros

Folds 90 degrees for low clearance without removing the antenna
Indexes at 30 degree increments rather than flopping loose
Mounts to either side or the rear, spacer included
Clamping bracket holds the antenna properly when stowed
Magnetic base supplied in the box
One antenna mount for fiberglass, whip and magnetic base types
3CR12 stainless on a part with a moving joint
Only 3.44 lbs

Cons

Fiberglass antennas must be under 1 metre
Holds one antenna, so a dual radio setup needs two mounts
Coax routing is on you, though the Slimline 3 side channels help
Designed for the Slimline 3 specifically

Frequently Asked Questions

Will it take my CB or GMRS antenna?

It handles fiberglass antennas under 1 metre, whip antennas, and magnetic base antennas, with a magnetic base included. That covers most CB, GMRS and ham setups running on a vehicle. The limit to watch is fiberglass length, since anything over a metre puts more leverage on the mount than it is built for. Call us at 844-200-3979 with your antenna and we will confirm.

How does the fold-down work?

An index pin releases the antenna so it can drop down, and the mount pivots 90 degrees total, forward or backward from upright, in 30 degree steps. The clamping bracket then holds it flat and secure rather than leaving it resting loose against the rack where it would vibrate. Takes seconds, and you never unbolt the antenna.

Can I mount it at the back of the rack?

Yes. It secures to either side or the rear of the Slimline 3, and a rear mounting spacer is supplied for that position. Rear mounting keeps the antenna furthest from the cab and clear of a rooftop tent or awning, which is often the cleanest spot once the rest of the build is in place.

Can I run two antennas?

Each mount holds one antenna, so a dual radio setup needs two mounts. That is straightforward on a Slimline 3, since you can put one on each side, or one on a side and one at the rear. Call us at 844-200-3979 and we will work out the placement around your tent and awning.

Where does the coax run?

Cable routing is down to your install, but the Slimline 3 helps here. The rack has concealed wiring channels in the side profiles with corner pass-throughs and breakout tabs, designed for running cable out of sight. That is the same path people use for light wiring, and it works just as well for antenna coax.