Prinsu Toyota Highlander Original Roof Rack 2014-2019
Prinsu Toyota Highlander Original Roof Rack 2014-2019
The Prinsu Original Roof Rack for the 2014-2019 Toyota Highlander (3rd Generation) revolutionized the overland and off-road industry as the world's first truly modular, low-profile roof rack system. Designed for adventurers who need a lightweight yet incredibly strong platform, the Prinsu is the blend of form and function that every other rack since has tried to replicate. Whether you are hauling recovery gear, mounting a rooftop tent, securing a cargo box, or carrying bikes and kayaks, this rack provides a sleek, aerodynamic platform that does not compromise your Highlander's styling.
The Prinsu adds only 2.6 inches to your vehicle's height, keeping the center of gravity low and the overall look streamlined. It utilizes existing factory mounting points on your Highlander, requiring no drilling or permanent modification. High-strength aluminum construction with a durable satin black powder coat finish resists corrosion and UV exposure. A full-length wind deflector and noise-reducing rubber trim keep the ride quiet at highway speeds.
Bolt-On Installation. No Drilling.
The Prinsu Original uses your Highlander's existing factory mounting points. No drilling, no rivets, no permanent modification to your vehicle. If you ever want to remove the rack, your roof remains factory-original. This is a straightforward bolt-on install that most owners complete at home with basic hand tools.
T-Slot Technology: Endless Mounting Options
The heart of the Prinsu rack is its T-slotted aluminum crossbars. Unlike traditional baskets or fixed-point racks, the Prinsu system is completely customizable. Slide your crossbars forward or backward to accommodate specific gear like kayaks, bikes, cargo boxes, or a rooftop tent. The T-slots let you bolt down accessories, including MaxTrax mounts, Rotopax, tie-down rings, and light bars, anywhere on the rack without drilling new holes. The crossbar spacing adjusts to fit your exact gear layout, and you can reconfigure it anytime your setup changes.
Low-Profile. Quiet. Garage-Friendly.
One of the most common complaints with aftermarket roof racks is wind noise and drag. The Prinsu was engineered with a form-fitting design that follows the exact contour of your Highlander's roofline. By sitting closer to the roof and using a precision-angled wind deflector, the rack directs airflow over your gear rather than through it. The included noise-reducing rubber trim further cuts down on vibration and whistle at speed. Adding only 2.6 inches of height means you clear garage doors, parking garages, and low-hanging branches without worry.
More Features
Lightweight Aluminum Construction: Weight is the enemy of performance. Prinsu uses high-grade aluminum instead of traditional steel, offering an exceptional strength-to-weight ratio. This reduces the added weight on your roof, keeps your center of gravity lower, and preserves fuel economy. Aluminum naturally resists rust, making it ideal for coastal environments, snowy climates, and muddy trails.
Satin Black Powder Coat: Each rack comes with a durable, UV-resistant satin black powder coat finish that protects against scratches and the elements. The finish looks clean and maintains its appearance after years of use and UV exposure.
Drop-Point Crossbars: Custom-designed crossbars feature integrated drop points, allowing for fast, easy, and secure accessory mounting without complicated drilling. Accessories lock into the drop points and T-slots for a secure hold.
Wind Deflector Options: The Prinsu offers a standard wind deflector or a "cutout" version designed to flush-mount a front-facing LED light bar. Choose the standard deflector for maximum noise reduction. Choose the cutout version if you plan to run a light bar integrated into the front of the rack for a clean, factory look.
Specifications
| Vehicle | 2014-2019 Toyota Highlander (3rd Generation) |
| Construction | High-strength aluminum |
| Finish | Satin black powder coat (UV-resistant) |
| Crossbar System | T-slotted aluminum with drop points |
| Added Height | 2.6" |
| Wind Deflector | Full-length, noise-reducing (standard or cutout for light bar) |
| Noise Reduction | Rubber trim included |
| Installation | Bolt-on using factory mounting points. No drilling required. |
| Accessory Compatibility | Rooftop tents, cargo boxes, bike racks, kayak carriers, MaxTrax, Rotopax, light bars, tie-down rings |
Pros
- No-drill, bolt-on installation using existing factory mounting points. Zero permanent modification
- T-slotted crossbars with adjustable spacing provide unlimited accessory mounting configurations
- Only 2.6" of added height. One of the lowest-profile racks on the market
- Full-length wind deflector and noise-reducing rubber trim keep the ride quiet at highway speed
- High-strength aluminum with UV-resistant powder coat resists corrosion in all environments
- Drop-point crossbars allow fast, tool-free accessory mounting without drilling
- Wind deflector cutout option available for flush-mounting a front-facing LED light bar
Cons
- Fits 2014-2019 Highlander (3rd Gen) only. Does not fit the 2020+ 4th generation or older 2nd gen models
- Prinsu does not publish a specific dynamic load rating. Verify your Highlander's factory roof load capacity and plan your gear weight accordingly
Frequently Asked Questions
Can I mount a rooftop tent on the Prinsu Highlander rack?
Yes. The T-slotted crossbars accept rooftop tent mounting brackets, and many owners run tents on this rack successfully. However, you should verify that the combined weight of the rack, tent, and occupants does not exceed your Highlander's factory roof load capacity. Lighter hardshell tents and wedge-style tents are the best fit for the Highlander platform. Browse our rooftop tent collection here.
Does this rack require drilling?
No. The Prinsu Original uses your Highlander's existing factory mounting points for a bolt-on installation. No drilling, no rivets, no permanent changes. If you ever remove the rack, your roof remains in factory condition. Most owners complete the install at home with basic hand tools.
Standard wind deflector or cutout: which should I choose?
Choose the standard wind deflector if you do not plan to run a front-facing LED light bar. It provides maximum noise reduction and clean airflow over the rack. Choose the cutout version if you want to flush-mount an LED light bar into the front of the rack for an integrated, factory look. Both deflectors are full-length and include noise-reducing rubber trim.
Does this rack fit the 2020+ Highlander?
No. This rack is designed specifically for the 2014-2019 Toyota Highlander (3rd Generation). It does not fit the 2020+ 4th generation model, which has a different roofline and mounting point layout. Contact us at 844-200-3979 if you have a different Highlander year and we will help you find the right rack.
What accessories can I mount on the Prinsu?
The T-slot crossbar system accepts virtually any accessory: rooftop tents, cargo boxes, bike racks, kayak carriers, ski racks, MaxTrax mounts, Rotopax fuel cans, tie-down rings, light bars, and more. Slide crossbars to any position for your specific gear layout. Bolt accessories directly into the T-slots without drilling. Reconfigure anytime your setup changes.
Complete Your Build
Questions About the Prinsu Highlander Rack?
We will confirm year compatibility and help you choose the right wind deflector for your build.
844-200-3979
