Sherpa Blanca Roof Rack for 2008-2021 Land Cruiser 200 & LX570
Sherpa Blanca Roof Rack for 2008-2021 Land Cruiser 200 & LX570
Ordering for a Lexus LX570? Please Read First.
- The Blanca fits 2008-2015 LX570 only. It is not compatible with 2016 and later LX570s.
- Tell us it is for an LX570 in your order notes or by calling 844-200-3979. The LX570 needs M8 mounting nuts that we include only when we know.
- Installation on the LX570 requires dropping the headliner to reach the mounting hardware.
✓ Drill-Free. Zero Vehicle Modification.
The Blanca mounts to factory locations on your Land Cruiser 200. No drilling, no cutting, and zero modification to the vehicle. Six mounting brackets ship with rubber seals, so nothing permanent happens to your roof.
The 200 Series is the Land Cruiser a lot of people consider the last of the truly over-engineered ones, and it deserves a rack built the same way. The Blanca is the full-length Sherpa PEAK Land Cruiser 200 roof rack, spanning 95.5 inches with 10 extrusion crossbars and carrying 400 lbs dynamic and 700 lbs static, with no drilling required.
That 400 lb dynamic figure is the headline. Most full-length roof racks rate 300 lbs for driving. The Blanca uses six mounting brackets rather than the usual four, spreading load across more points, and the result is a third more capacity while the vehicle is moving. At roughly 55 lbs it is also one of the lighter full-length racks Sherpa builds for a vehicle this size. Construction is 1/4 inch aircraft-grade aluminum side panels with stainless steel hardware. Black textured powder coat, black anodized crossbars, black oxide stainless hardware. Choose a Full Height wind fairing or a Half Height fairing sized for a single-row light bar. Manufactured in Colorado. Lifetime Warranty.
Land Cruiser 200 and LX570
The Blanca fits the Toyota and its Lexus twin, with one important difference in years. If you are shopping for an LX570 roof rack, read the Lexus card carefully.
2008-2021 Toyota Land Cruiser 200
The full LC200 run. A 200 series roof rack that covers effectively the whole roof at 95.5 inches, with the capacity to run a rooftop tent plus an overland load.
2008-2015 Lexus LX570 only
A proper LX570 roof rack for the earlier model years. 2016 and later LX570s are not compatible. Install requires dropping the headliner, and you need to tell us it is for an LX so we include the M8 nuts.
Why 400 lbs Dynamic Matters
Dynamic rating is the figure that applies while you are driving, and it is the one most people should actually check. Static rating, which is always higher, only covers the tent plus occupants once you are parked.
Most full-length racks sit at 300 lbs dynamic. The Blanca carries 400. That extra 100 lbs is the difference between running a rooftop tent and then watching what else goes up there, versus running a tent alongside traction boards, a fuel can, an awning, and a light bar without recalculating every trip.
The reason is the mounting. The Blanca uses six brackets where many racks use four, spreading the load across more attachment points and keeping stress off any single one.
The PEAK Series
Industry leading premium roof rack systems. The PEAK series is the go-to for a premium aluminum roof rack. It is the line that Sherpa built its name on, and for years it has carried the gear of the most extreme adventurers. Sherpa believes in the constant evolution of their products, building the toughest systems on the market. From industry-leading alloys to uncompromising mounts with rubber seals, you will always Adventure with Confidence.
Crafted
Manufactured in Colorado with precision laser-cut 1/4" aluminum sideplates formed with CNC accuracy by Sherpa's team of professionals. They have created a very stout mounting structure, secured with stainless steel hardware, that will keep your gear where you need it. The 1/4 inch aircraft-grade aluminum is thicker than most competing racks, which is where the strength comes from without the weight penalty of steel.
Adaptable
Sherpa knows the importance of mounting all of your goodies on your rig. With the PEAK Series, you have the ability to mount just about anything, anywhere. With slots and holes all over the rack, plus Sherpa's line of accessories, you will never find yourself wishing you could mount something. Ten 50 inch crossbars slide to whatever spacing your gear needs, and you can bolt into any of them or strap directly to the side plates.
Durable
Strength is built into Sherpa's brand and the PEAK System is what they built their name on. Using the best in materials and hardware, you can beat on this system every weekend and trust it to show up to work on Monday. The 400 lb dynamic and 700 lb static ratings handle a full rooftop tent setup with occupants, gear, and accessories. All backed by Sherpa's Lifetime Warranty, just in case you get a little too western.
Which Fairing Is Right for You?
Sherpa's full height fairing is built for people who do not want to put a light bar on their rack. The half height fairing is made so you can fit a single row light bar while keeping everything flush. Both cost the same, so this is purely a build decision.
Specifications
| Vehicle | 2008-2021 Toyota Land Cruiser 200 Series (LC200) and 2008-2015 Lexus LX570 |
| Weight | ~55 lbs |
| Crossbars | 10 x 50" |
| Rack Dimensions | 95.5" x 50.5" x 2.5" |
| Dynamic Load Rating | 400 lbs |
| Static Load Rating | 700 lbs |
| Sideplate Material | 1/4" aircraft-grade aluminum |
| Mounting | 6 brackets with rubber seals |
| Finish | Black textured powder coat |
| Crossbar Finish | Black anodized |
| Hardware | Black oxide stainless steel |
| Installation | Drill-free. Zero vehicle modification |
| LX570 Notes | 2008-2015 only. Headliner must be dropped. M8 mounting nuts required, included on request |
| Fairing Options | Full Height (no light bar) or Half Height (single row light bar) |
| Manufactured | Colorado, USA |
| SKU | 135744 |
| Warranty | Lifetime |
What's Included
LX570 owners: M8 mounting nuts are required and are included only when you tell us the rack is for an LX570.
📄 Installation Instructions
Download the full Blanca install guide. No drilling required, and all hardware is included.
Pros
- 400 lbs dynamic, a third more than most full-length racks
- Six mounting brackets spread load across more points than the usual four
- Completely drill-free with rubber-sealed brackets
- Only ~55 lbs for a 95.5 inch full-length rack
- A 200 Series Land Cruiser roof rack covering the entire 2008-2021 LC200 run
- Also fits 2008-2015 Lexus LX570
- 1/4" aircraft-grade aluminum sideplates, thicker than most competing racks
- Choice of Full or Half Height fairing at the same price
- Made in Colorado with a Lifetime Warranty
Cons
- LX570 fitment is limited to 2008-2015. Later LX570s are not compatible
- LX570 install requires dropping the headliner, which adds real time to the job
- LX570 buyers must tell us so we include the M8 nuts. Miss that step and the install stalls
- No adjustable leveling mounts, unlike the Crestone and Atlas
- Fairing choice is made at purchase, so switching later means buying the other fairing separately
Frequently Asked Questions
Will it fit my Lexus LX570?
As a Lexus LX570 roof rack, the Blanca fits only 2008 through 2015 models. The Blanca is not compatible with 2016 and later LX570s. On a compatible LX570, installation requires dropping the headliner to access the mounting hardware, and the LX needs M8 mounting nuts that we include only when we know the rack is for a Lexus. Please mention it in your order notes or call us at 844-200-3979 before you order.
Does it fit every Land Cruiser 200?
Yes. The Blanca is an LC200 roof rack covering the full 2008 through 2021 Toyota Land Cruiser 200 Series run. It will not fit the 80 Series, 100 Series, or the 2024 and later 250 Series. For those, we carry the Sherpa La Sal for the 80 Series and the Sherpa Atlas for the 250.
Does installation require drilling?
No. The Blanca is drill-free and requires zero modification. It mounts to factory locations using six brackets with rubber seals, and all required hardware is included. On the Land Cruiser the install is straightforward. On the LX570 you will need to drop the headliner to reach the mounting hardware, which is the main extra step.
Why is the dynamic rating higher than other racks?
Six mounting brackets rather than the four most full-length racks use. Spreading load across more attachment points means less stress on any single bracket, and Sherpa rates the result at 400 lbs dynamic instead of the usual 300. That is the difference between running a rooftop tent and watching what else you add, versus running a tent alongside traction boards, a fuel can, and an awning.
Can I mount a rooftop tent on it?
Comfortably. 400 lbs dynamic covers the tent plus accessories while driving, and 700 lbs static covers the tent plus occupants once parked. The 95.5 by 50.5 inch platform with ten crossbars takes any full-size hardshell or softshell tent. For anyone building out Land Cruiser 200 accessories for overlanding, the rack is the foundation piece. Browse our rooftop tent collection here.
Which fairing should I choose?
Choose Full Height if you are not running a light bar. It has a taller smooth face that deflects the most air for the quietest ride. Choose Half Height if you want a single-row light bar to sit flush with the fairing line. Both cost the same. If a light bar is anywhere in your future plans, Half Height saves you buying a second fairing later.
Complete Your Build
Land Cruiser or LX570?
Tell us which, and the year. We will confirm fitment and make sure the right hardware ships with your rack.
844-200-3979
