FSR 270 Awning Walls V2 - Enclose Your Awning Into a Room
FSR 270 Awning Walls V2 - Enclose Your Awning Into a Room
V2 Awning Only. Not Compatible With V1.
These walls fit the FSR 270 Awning V2 only. They will not fit the original V1 270 awning. If you are unsure which generation you own, the V2 has redesigned swing hinges and a canvas cover over the mechanism. Call us at 844-200-3979 and we will identify it with you before you order.
An awning gives you shade and a dry patch of ground. Awning walls give you a room. This awning wall kit turns your FSR 270 Awning V2 into a fully enclosed, weather-protected living space that blocks wind, rain, sun, and insects, and it does it in minutes without tools.
Each panel works individually or zips to the next, so you are not committed to a single configuration. Run one panel as a windbreak on a breezy afternoon. Run two to cut the low sun. Zip the whole set together and you have a closed room off the side of your vehicle. The fabric is 420D polyester with a PU3000mm waterproof coating and UPF50+ sun protection, built to handle abrasion, moisture, and UV exposure on and off road.
Run One Panel or All of Them
The modular layout is what makes this worth owning rather than a fixed enclosure you either deploy or do not. You configure the walls to the weather, not the other way round.
Single Panel Windbreak
One wall on the windward side cuts the breeze across your cook setup without closing you in. The most common configuration, and it takes a couple of minutes.
Partial Enclosure
Two or three panels block low afternoon sun, add privacy at a busy site, or shelter the side where weather is coming from while keeping the rest open.
Full Awning Room
Zip every panel together and the 270's footprint becomes a closed 270 awning room: warmer, private, bug-free, and genuinely usable in a storm.
That flexibility matters more in practice than a spec sheet suggests. Conditions change through a day, and a setup that only works fully deployed tends to stay in the bag.
Built for Weather, Not Just Privacy
420D polyester with PU3000mm coating. This is a genuinely waterproof rating rather than water-resistant. Rain runs off rather than soaking through, which is what turns the enclosed area into somewhere you can wait out a passing storm instead of somewhere you retreat from.
UPF50+ sun protection. The walls block UV as well as light, so an awning enclosure in open desert or at altitude is genuine shade rather than filtered sun.
Abrasion and UV resistant. Walls live a hard life: packed wet, dragged across gravel, flapping in wind, left in the sun for days. The material spec is chosen for that rather than for a weekend in a state park.
Setup Takes Minutes
Attach each wall to your 270 Awning V2, stake them down, and you are done. No poles to assemble, no tools, no instructions to re-read every trip. Because each panel attaches independently, you can add or remove walls mid-trip as conditions change rather than committing at setup.
What People Actually Use It For
- Weather shelter. A passing storm stops being a reason to sit in the vehicle. Cook, eat, and wait it out under cover.
- Privacy at busy sites. Campgrounds, trailheads, and event parking all get crowded. Walls define your space.
- A changing room. Getting out of wet gear, into a wetsuit, or ready for bed without an audience.
- Bug protection. Enclosed space keeps mosquitoes and biting flies off you during the hours they are worst.
- Extra warmth. Blocking wind makes a surprising difference to how a shoulder-season evening feels.
- Tailgating and river days. Shade plus privacy plus a defined area, which is most of what you want from a day setup.
Specifications
| Compatibility | FSR 270 Awning V2 only. Not compatible with V1 |
| Fabric | 420D polyester |
| Waterproof Rating | PU 3000mm |
| Sun Protection | UPF 50+ |
| Configuration | Modular. Panels used individually or zipped together |
| Full Coverage | Completely encloses the FSR 270 awning footprint |
| Setup | Attach to awning, stake down. No tools required |
| Resistance | Abrasion, moisture, and UV exposure |
Pros
- Turns your 270 awning from shade into a fully enclosed, weatherproof room
- Modular panels work individually or zipped together, so you configure to conditions
- 420D polyester with a PU3000mm coating, genuinely waterproof rather than water-resistant
- UPF50+ blocks UV as well as light
- Setup is attach and stake. No poles, no tools, no instructions to relearn
- Add or remove panels mid-trip as the weather changes
- Blocks wind, rain, sun, and insects in one accessory
- Built for abrasion and UV, not just a weekend in a campground
Cons
- Fits the 270 Awning V2 only. V1 owners cannot use these
- Requires the awning itself, which is sold separately. This is an upgrade, not a standalone shelter
- FSR recommends staking and guying your awning whenever walls are fitted, since the enclosed area catches considerably more wind
- Panel dimensions and pack weight are not published by FSR, so call us if you need exact figures before ordering
Frequently Asked Questions
Will these fit my 270 awning?
Only if it is the FSR 270 Awning V2. These walls are not compatible with the original V1 270 awning. If you are not sure which generation you own, the V2 has redesigned swing hinges and a canvas cover protecting the mechanism. Call us at 844-200-3979 and we will identify it with you before you order, since this is exactly the kind of thing that turns into a return.
Do I have to use all the panels at once?
No, and that is the best thing about the kit. Each panel works individually or zips to the next. Run one as a windbreak on the breezy side, two or three to block low sun or add privacy, or zip the whole set together for a fully closed awning room. Because each attaches independently you can add or remove walls mid-trip as conditions change rather than committing when you set up.
Are they actually waterproof?
Yes. The fabric is 420D polyester with a PU3000mm waterproof coating, which is a genuine waterproof rating rather than water-resistant. Rain runs off instead of soaking through, so the enclosed space is somewhere you can wait out a storm rather than somewhere you retreat from. They also carry UPF50+ for sun protection and are built to resist abrasion and UV over years of use.
How long does setup take?
Minutes. Attach each wall to your deployed 270 awning, stake it down, and you are finished. There are no poles to assemble and no tools required. One panel goes up in a couple of minutes; the full enclosure takes a little longer but is still a single-person job.
Do I need to stake the awning down with walls fitted?
Yes. FSR specifically recommends using the guy lines and stakes supplied with your awning whenever walls are fitted. An open awning lets wind pass underneath; an enclosed one becomes a much larger surface catching air, which puts real load on the arms and mounting points. Stake and guy the awning properly before you attach walls, and take them down if wind picks up significantly.
Complete Your Setup
Not Sure If You Have a V1 or V2?
Send us a photo of your awning and we will identify the generation before you order.
844-200-3979
