FSR Aspen Pro Standard - 2 Person Roof Top Tent
FSR Aspen Pro Standard - 2 Person Roof Top Tent
The Aspen Pro Standard is a 2 person roof top tent that solves a problem most compact hard shells ignore: length. Interior is 81 1/2 inches long, nearly six and a half feet, so taller campers actually fit instead of sleeping diagonally or with their feet against the wall. That is roughly five and a half inches more than FSR's lighter Aspen Lite, and it is the main reason to choose this one.
As a 2 person rooftop tent it closes to just 7 3/8 inches including the mounting rail, one of the lowest profiles available in any hard shell, and weighs 134 lbs with a 750 lb weight capacity. FSR builds it for mid-size SUVs, pickups running above-cab height bed racks, and long bed pickups mounting below cab height. The whole body is wrapped in patented Tri-Layer insulation for genuine 4 season use, the top is honeycomb aluminum, and dual channel extruded aluminum rails let you mount crossbars and gear to the tent itself. Gas struts pop it open in under a minute. Memory foam mattress, 7.5 foot ladder, dimmable LED, and mount kit included.
The Length Spec Nobody Checks
Most buyers compare width and weight and never look at interior length. Then they spend a season with their feet pressed against the end wall. At 81 1/2 inches, the Aspen Pro Standard gives you nearly six and a half feet of usable sleeping length, which comfortably accommodates campers over six feet tall.
For comparison, FSR's Aspen Lite runs 76 inches of interior length and FSR recommends it for campers under 6 feet. Same 45 1/2 inch interior width, same 7 3/8 inch closed height, but five and a half inches less room to stretch out. If you or your camping partner are tall, that difference is the whole decision.
The tradeoff is weight and closed length. At 134 lbs and 86 1/2 inches closed, the Aspen Pro Standard needs more rack than the Lite does. Which is exactly why FSR positions it for mid-size SUVs and truck bed racks rather than crossovers.
4-Season Use, 100% Waterproof
FSR's patented Tri-Layer technology works like a canteen, strategically fortifying the entire tent where heat would otherwise seep in when it is hot and escape when it is cold. The construction is a polycotton fill sandwiched between two layers of 210D ripstop, armoring the whole tent body rather than just the roof panel. The entire body is completely waterproof, and the integrated rainfly adds another layer of weather protection and sun shielding on top of that.
Camp in Under a Minute
Pop open four quick latches, push up on the tent to engage the interior gas struts, extend the U-bar, and you are ready to camp. The whole sequence takes about thirty seconds once you have done it twice. The struts are designed to live inside the shell, so when the tent is closed they are protected rather than exposed to tree limbs and trail dirt. Spend more of your outdoor time doing the fun stuff and less of it on setup.
Premium Construction, Featherweight Class
An uber durable extruded aluminum frame, an open cross-slat floor for breathability, and a honeycomb aluminum top that prioritizes aerodynamics. Those three choices are what keep the Aspen Pro inside the featherweight class despite the feature-rich punch it is packing. Honeycomb structure delivers stiffness at low weight, which is how a compact rooftop tent built this way stays both light and low without giving up strength.
Find Your Fitment
FSR builds the Aspen Pro Standard for mid-size SUVs, pickups with above-cab height bed racks, and long bed pickups mounting below cab height. Confirm your rack's dynamic load rating covers 134 lbs and that you have 86 1/2 inches of usable rail length.
Sedans & Crossovers
Possible on a rack rated for the load, but 86 1/2 inches of rail is a lot for a small car. If your vehicle is compact, the Aspen Lite at 100 lbs and 80 inches is the better fit.
Mid-Size SUVs
The sweet spot FSR designed it around. The 7 3/8 inch closed height keeps overall vehicle height manageable, and 134 lbs sits inside most factory and aftermarket SUV rack ratings.
Mid-Size Trucks
On an above-cab height bed rack. A popular rooftop tent for Tacoma, Ranger, and Colorado builds, since a truck bed rack tent setup keeps the cab clear and the 7 3/8 inch closed height does not tower over the roofline.
Full-Size & Long Bed Trucks
Works above cab on a bed rack, or below cab height on a long bed. Plenty of rack capacity left for traction boards, fuel cans, and lighting alongside.
More Details That Matter
Condensation Elimination: The aluminum open cross-slat floor saves weight and lets the tent breathe from underneath instead of trapping moisture against a solid base. FSR pairs it with strategically located venting for 360 degree airflow. Waking up to a wet interior is the most common rooftop tent complaint, and this design attacks the cause rather than adding a vent and hoping.
Dual Channel Accessory Mounting: Dual channel extruded aluminum lets you mount crossbars, shovels, traction boards, light bars, Rotopax, and more to the tent itself. Two channels rather than one means more mounting positions and more flexibility about where things go, which matters when your rack is already carrying the tent.
Integrated Rainfly: The tent body is already completely waterproof. The integrated rainfly is a second layer of security and sun shielding on top of that, rather than the only thing between you and the weather.
Heater, AC, and Electrical Ports: Built-in ports for running a diesel heater duct, an AC line, or power through the tent body without leaving a gap for weather or bugs.
Adjustable Shoe Bag Locations: Two shoe bags that mount where you want them rather than where the factory decided, plus a gear storage grid, gas strut locks, grab handles, and an integrated dimmable LED light strip.
Which FSR Tent?
All six use FSR's patented Tri-Layer insulation and deploy in under a minute. They are built around different constraints.
| Aspen Pro | Aspen Pro XL | Aspen Lite | Kali | Kali King | Nova King | |
|---|---|---|---|---|---|---|
| Style | Clamshell | Clamshell | Clamshell | Pop up | Pop up | Foldout |
| Sleeps | 1 to 2 | 2 to 3 | 1 to 2 | 2 to 3 | 3 to 4 | 3 to 4 |
| Interior W | 45 1/2" | 55" | 45 1/2" | 52" | 72" | 72" |
| Interior L | 81 1/2" | 81.5" | 76" | 82" | 82" | 82" |
| Closed H | 7 3/8" | 7 3/8" | 7 3/8" | 12" | 12" | 11 1/2" |
| Weight | 134 lbs | 154 lbs | 100 lbs | 177 lbs | 207 lbs | 162 lbs |
| Capacity | 750 | 750 | 750 | 660 | 660 | 750 |
Choose the Aspen Pro Standard if you want a 2 person tent with full length for taller campers, on a mid-size SUV or a truck bed rack.
Choose the Aspen Lite if weight is the constraint and you are under 6 feet. Same width, 34 lbs lighter, 5 1/2 inches shorter inside.
Choose the Aspen Pro XL if you want the same length plus 9 1/2 more inches of width for a third person.
Need to sleep four? See the Kali King or Nova King. Short on rail length? The Kali closes to 59 inches.
Specifications
| Style | Full insulation Tri-Layer clamshell, gas-strut assisted |
| Sleeps | 1 to 2 people |
| Exterior Dimensions | 51 1/4" W x 86 1/2" L x 7 3/8" H (includes mounting rail height) |
| Interior Dimensions | 45 1/2" W x 81 1/2" L x 52" H |
| Weight | 134 lbs |
| Weight Capacity | 750 lbs |
| Shell | Aluminum hard shell with honeycomb aluminum top |
| Tent Body | Patented Tri-Layer: polycotton fill between two layers of 210D ripstop |
| Tent Floor | 600D breathable Oxford ripstop, PU coated 2000mm, open cross-slat design |
| Rainfly | Integrated. 210D Oxford ripstop PU 3000mm, silver blockout coating, UPF 50+ |
| Frame | Extruded aluminum with polymer corners |
| Ventilation | 360 degree |
| Mattress | Memory foam |
| Lighting | Integrated dimmable LED |
| Ladder | 7.5' telescoping |
| Deployment | Under one minute |
| Accessory Mounting | Dual channel extruded aluminum |
| Ports | Heater, AC, and electrical |
| Bedding Storage | Light bedding or sleeping bags |
| Best Suited For | Mid-size SUVs, pickups with above-cab bed racks, long bed pickups below cab |
What's Included
📄 Installation Manual
Download the rooftop tent installation manual covering mounting hardware and rack setup.
Pros
- 81 1/2" of interior length fits taller campers, 5 1/2" more than the Aspen Lite
- Just 7 3/8" closed, one of the lowest profile hard shells available
- 134 lbs sits inside most mid-size SUV and bed rack load ratings
- 750 lb weight capacity, the highest tier in the FSR range
- Patented Tri-Layer insulation armors the whole body for true 4 season use
- Honeycomb aluminum top and open cross-slat floor keep weight down without losing strength
- Dual channel aluminum lets you mount crossbars and gear to the tent itself
- Integrated rainfly on an already-waterproof body, plus heater, AC, and electrical ports
- Gas struts live inside the shell, protected from tree limbs and dirt
Cons
- Needs 86 1/2 inches of usable rail length closed. Short racks should look at the Kali at 59 inches
- Sleeps 1 to 2 at 45 1/2 inches wide. For three, the Aspen Pro XL adds 9 1/2 inches of width
- 34 lbs heavier than the Aspen Lite for the same interior width, so if you are under 6 feet the Lite may serve you better
- Interior bedding storage is limited to light bedding or sleeping bags
Frequently Asked Questions
Will I fit if I am over 6 feet tall?
Yes, and this is the main reason to choose the Aspen Pro Standard over the lighter Aspen Lite. Interior length is 81 1/2 inches, nearly six and a half feet, which comfortably accommodates campers over six feet. The Aspen Lite runs 76 inches and FSR specifically recommends it for campers under 6 feet. Same 45 1/2 inch width, same 7 3/8 inch closed height, but five and a half inches less room to stretch out.
Can I mount it on a truck bed rack?
Yes. FSR designed the Aspen Pro Standard specifically for pickups with above-cab height bed racks and long bed pickups mounting below cab height. A truck bed rack tent setup keeps the cab roof clear and puts the tent where it is easy to access. At 7 3/8 inches closed it does not tower over the cab line, which keeps the whole build looking proportional. Confirm your bed rack's dynamic rating covers 134 lbs and that you have 86 1/2 inches of usable rail. Browse bed racks here.
Will my rack carry 134 lbs?
Check your rack's dynamic load rating, the figure that applies while driving, and confirm it covers 134 lbs plus anything else up there. Static rating, which is higher, covers the tent plus occupants once parked. The 86 1/2 inch closed length is usually the tighter constraint on mid-size vehicles. Call us at 844-200-3979 with your vehicle and rack and we will confirm both numbers before you order.
Aspen Pro Standard or Aspen Lite?
Both are 1 to 2 person clamshells at 45 1/2 inches wide and 7 3/8 inches closed with a 750 lb capacity. The Pro Standard gives you 81 1/2 inches of interior length and weighs 134 lbs. The Aspen Lite gives you 76 inches and weighs 100 lbs. Choose the Pro Standard if you or your partner are tall, or if you want the premium build with the honeycomb top and dual channel mounting. Choose the Lite if weight is your constraint and you are under 6 feet.
Is it warm enough for winter?
Yes. The patented Tri-Layer construction wraps the entire tent body with a polycotton fill sandwiched between two layers of 210D ripstop, which FSR compares to how a canteen works: holding heat in when it is cold and blocking it when it is hot. The body is completely waterproof and the integrated rainfly adds a second layer. Built-in ports let you run a diesel heater duct through the body without leaving a gap for weather.
Will I wake up to condensation?
Far less than in a sealed-floor tent. The aluminum open cross-slat floor lets the tent breathe from underneath rather than trapping moisture against a solid base, and FSR pairs it with strategically located venting for 360 degree airflow. The floor design does double duty, saving weight and improving airflow at the same time. Condensation is the most common complaint about rooftop tents generally, and this construction attacks the cause.
Complete Your Setup
Will It Fit Your Rack?
Tell us your vehicle and rack. We will confirm your load rating covers 134 lbs and that you have 86½ inches of rail.
844-200-3979
