Backwoods DRIFTR Roof Rack for Toyota Land Cruiser 250 (2024-2026)

SKU: BWTC5L-9890

Backwoods DRIFTR roof rack installed on Toyota Land Cruiser 250 LC250

Backwoods DRIFTR LC250 roof rack cargo carrier configuration on Land Cruiser 250

Toyota Land Cruiser 250 driving off road with DRIFTR roof rack installed

Side view of Backwoods DRIFTR roof rack on Toyota Land Cruiser 250

Toyota Land Cruiser 250 off road with DRIFTR roof rack and cargo carrier

Toyota Land Cruiser 250 with DRIFTR roof rack and rooftop tent mounted

Close up of mounting bracket and front fairing on DRIFTR LC250 roof rack

DRIFTR LC250 roof rack by Backwoods installed on new Toyota Land Cruiser 250

Black Toyota Land Cruiser 250 with Backwoods DRIFTR roof rack installed

Top view of Backwoods DRIFTR roof rack for Toyota Land Cruiser 250

Front view of Backwoods DRIFTR LC250 roof rack for Toyota Land Cruiser 250

Top of Backwoods DRIFTR LC250 roof rack showing extrusion mounting system

Rear view of Backwoods DRIFTR roof rack on Toyota Land Cruiser 250

Close up of adjustable front fairing on DRIFTR LC250 Toyota Land Cruiser roof rack

T-track load bars on Backwoods DRIFTR roof rack for Toyota Land Cruiser 250

Backwoods DRIFTR LC250 roof rack installed on black Toyota Land Cruiser 250

DRIFTR LC250 roof rack with T-track load bars and accessory mounts on Land Cruiser 250

Backwoods DRIFTR LC250 roof rack with modular deck panel accessories installed

Toyota Land Cruiser 250 with DRIFTR roof rack and rooftop tent installed

Backwoods DRIFTR Roof Rack for Toyota Land Cruiser 250 (2024-2026)

SKU: BWTC5L-9890

$1,301.07$1,399.00

Call Our Experts: (844) 200-3979

Easy Financing

60 Days Returns!

Safe & Secure Checkout

Call Our Experts: (844) 200-3979

Easy Financing

60 Days Returns!

Safe & Secure Checkout

Backwoods DRIFTR Roof Rack for Toyota Land Cruiser 250 (2024-2026)

The 2024+ Toyota Land Cruiser 250 is built for serious adventure — but the factory roof isn't ready for everything your trips demand. Whether you're mounting a rooftop tent, hauling recovery gear, running extra fuel, or setting up a full lighting system, the stock setup falls short fast. The Backwoods DRIFTR Roof Rack for the Toyota Land Cruiser 250 changes all of that. Purpose-built for the LC250 platform, this modular aluminum Land Cruiser roof rack transforms your rig into a fully capable overland platform — with zero drill holes and zero permanent modifications.

Quarter-Inch Aluminum Construction

Every structural component of the DRIFTR LC250 roof rack is fabricated from 0.25" thick aluminum — side rails, fairings, crossbars, and mounting hardware. That thickness delivers the rigidity needed for rooftop tent mounting and loaded expedition travel, while keeping total weight manageable enough for a two-person install. Aluminum construction means permanent corrosion resistance, no rust from beach salt or winter road exposure, and a powder coat finish that bonds at a molecular level for lasting durability.

Many competitors use thinner aluminum — often 0.125" to 0.188" — that flexes under real load. The DRIFTR LC250 rack holds firm with a rooftop tent, occupants, recovery gear, and expedition supplies all mounted simultaneously.

700 lb Static / 300 lb Dynamic Weight Capacity

The DRIFTR Toyota Land Cruiser 250 roof rack delivers 700 lbs of static capacity when parked and 300 lbs of dynamic capacity while driving — far exceeding Toyota's conservative factory roof ratings. That means you can confidently run a full overlanding setup: a 150+ lb hardshell rooftop tent, two occupants inside, plus jerry cans, traction boards, a Hi-Lift jack, and additional cargo simultaneously.

The 300 lb dynamic rating handles loaded trail travel, washboard roads, technical off-road terrain, and highway driving with a fully kitted-out rack without approaching structural limits.

Eight Triple-Slotted Extrusions Included

The LC250 DRIFTR rack ships with eight 1x3 triple-slotted aluminum extrusions. One reinforces the front fairing structurally, leaving seven available for accessory mounting across the rack surface. These solid aluminum extrusions accept T-nuts (included) that slide in and lock at any point along their length — giving you infinite positioning flexibility for deck panels, awning brackets, traction board mounts, light bars, and recovery equipment.

Pre-drilled slots in the side rails let you position extrusions anywhere along the rack's length. Cluster them forward for RTT support, spread them evenly for general cargo, or concentrate them at specific zones for dedicated accessory mounting. Reposition anytime as your setup evolves.

Adjustable Front Fairing

The front fairing slides forward and backward along the rack to accommodate different mounting configurations and light bar sizes from 30" up to 50". Slotted cutouts accept both 1/4" and 3/8" mounting hardware for light bars and pods. Beyond lighting, the fairing reduces wind noise at highway speeds — a common complaint with lesser-designed rack systems.

Rear Chase Light Pockets

The rear fairing includes tabbed chase light pockets sized perfectly for Baja Designs S1 and S2 lights, or any similar ~3" diameter pod. The tabbed design gives you a clean look without lights installed, or a simple cutout option when you're ready to add them. Slotted mounting and integrated wire routing channels handle all rear lighting needs cleanly.

No-Drill Bolt-On Installation

The DRIFTR LC250 roof rack mounts via six rubber blocks and two brackets that sit on the factory weatherstripping — no drilling, no cutting, no permanent modification. The install is fully reversible. Remove it and your Land Cruiser 250 returns to factory condition with no trace of modification. Sealant is included for all mounting bolt locations to prevent any water intrusion.

Installation time: 3–4 hours with two people and basic hand tools
Metric socket set, torque wrench, and Allen keys are all you need
Video installation guide available on YouTube

Factory Sunroof Compatible

The DRIFTR rack for the Toyota Land Cruiser 250 is fully compatible with the factory sunroof. Mounting blocks and brackets are positioned to avoid sunroof tracks, drainage channels, and opening paths. Your sunroof opens and closes normally with the rack installed — and factory drainage paths remain completely unobstructed.

Modular Accessory Ecosystem

The DRIFTR LC250 off-road roof rack is the foundation of a complete overland build. The triple-slotted extrusion system works with the full range of Backwoods accessories and a wide variety of third-party gear:

Universal deck panels in multiple sizes for a solid cargo platform
HD awning brackets for 270° and batwing awnings
Dogbone traction board mounts (MaxTrax, TRED, ActionTrax compatible)
Light bar brackets and mounting hardware
Jerry can vertical mounts (Rotopax and NATO compatible)
Shovel and tool mounts for expedition gear
Additional extrusion pairs available for denser mounting

The integrated T-track load bars also accept standard crossbar-mounted accessories from Thule, Yakima, and Rhino-Rack — your existing cargo box or bike trays bolt straight on.

Free Powder Coat, Free Shipping, Lifetime Warranty

Professional black powder coat comes standard at no extra charge — a $250 value that many competitors charge extra for. Free shipping is included to commercial addresses in the lower 48 states. Residential delivery is available with a $150 lift gate fee. And every DRIFTR LC250 Toyota Land Cruiser roof rack is backed by Backwoods' lifetime warranty covering defects in materials and workmanship for the life of original ownership.

Designed, manufactured, and assembled entirely in the USA at Backwoods' facility in Springdale, Arkansas.

Specs

Spec	Detail
Fitment	2024–2026 Toyota Land Cruiser 250
Material	1/4" (0.25") aluminum throughout
Finish	Black powder coat (included free)
Static Weight Capacity	700 lbs
Dynamic Weight Capacity	300 lbs
Extrusions Included	8 total (7 available for accessories)
Extrusion Type	1x3 triple-slotted aluminum
Mounting	6 rubber blocks + 2 weatherstrip brackets
Drilling Required	No — fully bolt-on
Sunroof Compatible	Yes
Light Mounting	Front + rear slotted fairings (1/4" & 3/8")
Chase Light Pockets	Baja Designs S1/S2 or similar ~3" pod
Warranty	Lifetime (original owner)
Made In	USA — Springdale, Arkansas
SKU	BWTC5L-9890

Pros and Cons

Pros

0.25" aluminum construction — rigid, lightweight, and permanently corrosion-proof
700 lb static / 300 lb dynamic capacity — handles full overland builds with confidence
8 extrusions included — more mounting flexibility than most competing LC250 roof racks
Fully bolt-on, no-drill install — completely reversible with zero damage to your vehicle

Cons

Accessories like deck panels, awning brackets, and handles are sold separately
Residential freight delivery incurs a $150 lift gate fee

Frequently Asked Questions

Does this fit the 2024 Toyota Land Cruiser 250?
Yes. The DRIFTR rack is purpose-built for the 2024–2026 Toyota Land Cruiser 250 Series (LC250). It is not compatible with older Land Cruiser models.

Will this work with my factory sunroof?
Yes. The rack is specifically designed to accommodate factory sunroof operation without blocking, interfering with, or affecting the sunroof drainage system.

Do I need to drill into my roof to install this?
No. The DRIFTR LC250 roof rack uses a fully bolt-on installation with rubber mounting blocks and weatherstrip brackets. No drilling or permanent modification required.

Can I mount a rooftop tent on this rack?
Yes. The 700 lb static capacity and 7-extrusion mounting system support both hardshell and softshell rooftop tents. Position the extrusions to match your specific tent's mounting pattern.

Is powder coat included in the price?
Yes. Professional black powder coat — a $250 value — is included as standard at no extra charge.

Where is this rack made?
Designed, manufactured, and assembled in the USA at Backwoods Adventure Mods' facility in Springdale, Arkansas.

Ready to build out your LC250? Add the DRIFTR roof rack to your cart and start the best overland platform you've ever owned.