Icon 4Runner 0-3.5" Suspension System - Stage 2 Billet UCA

Icon 5th Gen 4Runner 0-3.5" Suspension System - Stage 2 Billet UCA - 2010-Current

Any vehicle, much less an off-road vehicle, must have a reliable and sturdy suspension system. It can improve how well your car handles rocky terrain without harming it. We are therefore delighted to present the Icon suspension system made to fit the 4Runner models.

The Icon 5th Gen 4Runner suspension kit was constructed out of durable CNC machined 6061 aircraft grade aluminum and has a corrosion-resistant CAD plated coilover shock body with 7/8" shaft. This is also a bolt-on system meaning that no cutting or welding is needed for installation.

With a few small adjustments and modifications, this ICON Stage 2 suspension system for the 5th Gen Toyota 4Runner uses the same parts as the Stage 1 system. The extended travel version of the 2.5 Series coilover shocks used in this system provides more wheel travel than the Standard Travel units, improving your on and off-road performance even more. Since these shocks do offer more suspension travel, an ICON upper control arm is necessary.

Upper control arms with the proprietary ICON Delta Joint are a component of this system. The Delta Joint is a heavy-duty, high-angle ball joint that combines typical uniball performance with the durability of a ball joint.

The industry standard uniball does an excellent job of enabling a vehicle's control arms to articulate with minimum binding, but it has an inherent flaw that leaves more to be desired when employed in a daily driving application: exposure to the environment.

The Extended Travel version of the 2.5 Series coilover shocks used in this system provides more wheel travel than the Standard Travel units, improving your on and off-road performance even more. Since they do provide more suspension travel they require the use of an ICON upper control arm.

Upper Control Arm 

Whenever you are changing your vehicle's geometry and upgrading it with a suspension kit, especially on 4WD vehicles, you absolutely need an upper control arm. The UCA is there to correct alignment and inherent clearance issues that arise when you lift or modify the suspension of your 4WD. Upper control arms can be found on independent front suspension (IFS) vehicles and they connect the top of the spindle to the frame.

The UCA is not a load-bearing piece of an IFS suspension, however, it does serve the purpose of guiding your spindle in a pre-determined motion when your suspension cycles up or down. Said load is handled by the lower control arm, which connects to the lower portion of the spindle.

Icon 4Runner Suspension System Features

• Increased wheel travel and ride quality over stock
• Vehicle specific tuned front and rear shocks for superior shock damping and control
• Adjustable coilovers provide 0-3.5" of front lift height
• Extended Travel coilovers matched with ICON UCA provides increased front droop travel
• 6061 aircraft grade aluminum CNC machined components
• Corrosion resistant CAD plated coilover shock body with 7/8" shaft
• FK Rod End bearings for extended longevity and minimal deflection
• 2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
• Bolt-on system means no cutting or welding necessary for install

Tech Info

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: ICON Alloys | 17x8.5" w/ 4.75” Backspace / 0mm Offset
• Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.00” Backspace / 0mm Offset
• Recommended Aftermarket Wheels: ICON Alloys | 20x9" w/ 5.00” Backspace / 0mm Offset
• Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)
• APPLICATION NOTE #46: SUSPENSION SYSTEM COMPATIBLE WITH KDSS. FRONT SWAY BAR RELOCATION BRACKETS NOT USED FOR KDSS EQUIPPED VEHICLES. CERTAIN YEARS REQUIRE TRIMMING FOR FRONT RESERVOIR BRACKET FITMENT
• APPLICATION NOTE #47: 700LB/IN EXPEDITION COIL AVAILABLE FOR HEAVIER EQUIPPED VEHICLES
• APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE
• APPLICATION NOTE #102: KDSS EQUIPPED REQUIRE REAR TRACK BAR 54200
• Ships in multiple boxes

Included

• 58647 (QTY: 1) | 10-UP FJ/4RNR/10-UP GX EXT TRAVEL 2.5 VS IR COILOVER KIT
• 58551DJ (QTY: 1) | 07-UP FJ/03-UP 4RNR/03-UP GX BILLET UCA DJ KIT
• 52700 (QTY: 1) | 07-UP FJ/03-UP 4RNR/03-UP GX REAR 2" SPRING KIT
• 56505 (QTY: 2) | 07-UP FJ/03-UP 4RNR/03-UP GX 1-3" REAR 2.0 VS IR

5th Gen 4Runner Stage 2 Suspension System Installation Manual

View the coilover kit installation manual HERE!

View the rear spring kit installation manual HERE!

View the rear 2.0 VS IR installation manual HERE!

View the UCA kit installation manual HERE!

ICON Warranty

View the ICON Vehicle Dynamics Warranty HERE!