Cali Raised LED High Clearance Side Wings for Stealth Bumper
Cali Raised LED High Clearance Side Wings for Stealth Bumper
Check These Before You Order
Wings only. This listing is the left and right side wings. They require the Cali Raised LED Stealth Bumper for the 2014-2024 4Runner, which is sold separately.
Not for the 4Runner Limited. Every other 2014-2024 trim is covered.
2014 and later only. The 5th gen's front end changed for 2014, so 2010-2013 trucks are not covered. Not sure? Call 844-200-3979.
The 5th gen 4Runner front bumper sits well out ahead of the front wheels, and the corners are where that shows on the trail. Climb a ledge at an angle or squeeze past a rock on a tight switchback and a low bumper corner is often the first thing to touch, long before the tyre has a chance to do its job.
These side wings fix that on the Cali Raised 4Runner stealth bumper. They are angled, heavy-duty 3/16" steel, finished in BK59 textured matte black powder coat, and shaped to pull the corners up and in. That turns the Stealth Bumper into a proper 4Runner high clearance bumper while keeping its low-profile look, and the wings are designed around your factory fog lights.
Why a 4Runner High Clearance Bumper Matters
On the trail, your truck rarely meets an obstacle square on. You approach a ledge slightly crossed up, or turn into a wash at an angle, and one front corner arrives first. If that corner hangs low and wide, it hits, drags or hangs the truck up before the front tyre ever touches the rock.
High clearance wings cut that corner back and up. Cali Raised say the angled design reduces front corner hang-ups and improves approach angle compared to lower-hanging corner sections. In practice, that means the tyre gets to the obstacle first and climbs it, rather than the bumper scraping across it.
Ledges at an Angle
The corner that used to touch first now sits higher and further back, so the tyre leads.
Tight Switchbacks
Turning hard past rocks and trees, the front corners swing wide. Tucked-in wings give you more room.
Ruts and Washes
Dropping into a rut nose-down puts the corners closest to the ground. Less overhang means less drag.
✓ Your Factory Fog Lights Stay
Some high clearance setups cost you the factory fog lights. Cali Raised designed these wings to accommodate the factory fog lights on compatible bumper configurations, so you keep them. If you want to confirm your configuration, call us before you order.
Which 5th Gen 4Runners They Fit
| Your 4Runner | Fits? |
|---|---|
| 2014-2024 SR5 and SR5 Premium | Yes |
| 2014-2024 Trail, Trail Premium and Venture Special Edition | Yes |
| 2014-2024 TRD Sport, TRD Off-Road, TRD Off-Road Premium and TRD Pro | Yes |
| 2014-2024 Limited | No |
| 2010-2013 5th gen | No, front end differs |
| Any 4Runner without the Cali Raised bumper | No, the bumper is required |
3/16" Steel With a Textured Finish
The wings are cut from 3/16" steel, which is the right material for a part designed to take hits at the corners. Together they weigh about 30 lbs, so you are adding real armour rather than a cosmetic trim piece.
The finish is BK59 powder coat, a textured matte black that hides trail scuffs well and resists corrosion. Like any bumper armour, the high spots will wear where they meet rock, which is exactly what they are there for. A touch-up with black chassis paint keeps rust off.
The angled shape keeps the setup a true 4Runner low profile bumper, designed to follow the factory body lines, so the finished front end looks clean rather than bolted on.
Installation
Cali Raised rate the install as moderate and estimate about 2 hours for the side wings alone. The wings bolt onto the bumper, and no welding is needed.
If You Are Installing the Bumper Too
The full bumper installation requires cutting or trimming the factory plastic bumper. No welding is required. Plan for that extra work and time if you are fitting the bumper and wings together.
- Get the bumper on and aligned first. The wings mount to it, so it needs to be fitted and square before they go on.
- Two people make it easier. At around 15 lbs a side, holding each wing in place while you start bolts is awkward alone.
- Snug, check, then tighten. Fit both wings loosely, compare the gaps left to right, then torque everything.
- Check the fog lights. Make sure they work and are aimed properly before you finish.
- Re-check after your first trail run. Standard practice for armour that takes hits.
Specifications
| Fitment | 2014-2024 Toyota 4Runner, 5th gen, non-Limited trims |
| Not compatible | 4Runner Limited, 2010-2013 trucks |
| Requires | Cali Raised LED Stealth Bumper for 2014-2024 4Runner (sold separately) |
| Material | 3/16" steel |
| Finish | BK59 textured matte black powder coat |
| Weight | About 30 lbs for the pair |
| Fog lights | Designed to accommodate factory fog lights |
| Installation | Bolt-on to the bumper, no welding |
| Install time | About 2 hours for the wings |
| Difficulty | Moderate |
What's Included
- Driver-side high clearance side wing
- Passenger-side high clearance side wing
The bumper is sold separately.
Pros
- Pulls the front corners up and in for fewer hang-ups
- Keeps the factory fog lights
- 3/16" steel adds real corner protection
- Low-profile look that follows the 4Runner's body lines
Cons
- Requires the Cali Raised bumper, sold separately
- Does not fit the Limited or 2010-2013 trucks
Frequently Asked Questions
Is this a full front bumper?
No. This listing is the left and right high clearance side wings only. They require the Cali Raised LED Stealth Bumper for the 2014-2024 4Runner, sold separately.
Do they fit the 4Runner Limited?
No. They fit non-Limited 2014-2024 4Runner trims, including SR5, Trail, TRD Sport, TRD Off-Road, TRD Pro and Venture Special Edition.
Will I keep my factory fog lights?
Yes. The wings are designed to accommodate the factory fog lights on compatible bumper configurations.
Do high clearance bumper wings improve approach angle?
Yes. Adding them turns the bumper into a 4Runner high clearance bumper. The angled design reduces front corner hang-ups and can improve approach angle compared to lower-hanging corner sections. Cali Raised do not publish a specific figure, since it also depends on your lift and tyres.
Will these fit my 2012 4Runner?
No. They are designed for the 2014-2024 4Runner. The 5th gen's front end changed for 2014, so 2010-2013 trucks are not covered.
Complete Your Build
Got the Stealth Bumper?
Adding wings to your existing 5th gen 4Runner bumper, or ordering both? Tell us your trim and year and we will make sure everything fits.
844-200-3979
