Cali Raised LED 52 Inch Curved Light Bar Roof Brackets Kit for 2007-2021 Toyota Tundra
Cali Raised LED 52 Inch Curved Light Bar Roof Brackets Kit for 2007-2021 Toyota Tundra
Installation Requires Drilling Into the Roof
These brackets mount by drilling into the roof of your Tundra. That is what makes them solid enough for a 52" bar, but it is a permanent change, so be sure before you start.
Built for the 2007-2021 Tundra. Not comfortable drilling the roof? A local auto electrician or accessory shop can fit them. Questions first? Call 844-200-3979.
A big truck deserves a big Tundra light bar, and the roof is where a 52" bar makes the most sense. Up there, it sits above the bonnet and the dust your own tyres throw up, and it throws light a long way down the trail. The hard part is mounting something that size so it stays put over washboard and does not rattle itself loose.
That is what this Tundra light bar mount is for. The brackets are custom-designed and laser cut specifically for the 2007-2021 Toyota Tundra, fabricated in-house in Fort Worth, Texas, and powder coated in a durable black semi-gloss mini texture. They hold a 52" curved light bar, slim or dual row, securely on the roof. Order the brackets on their own, or choose the combo with a 52" curved light bar and wiring harness included.
Brackets Only or the Combo?
There are two ways to buy this kit. Choose the variant that matches what you already have.
| Brackets Kit | Combo | |
|---|---|---|
| Roof brackets (pair) | Included | Included |
| Installation hardware | Included | Included |
| 52" curved LED light bar | Bring your own | Included |
| Wiring harness | Confirm with us | Included |
| OEM switch | Optional add-on | Optional add-on |
| Best for | You already own a 52" curved bar | Starting from scratch |
If you are starting from nothing, the combo is the simple route to a 2nd gen Tundra light bar: the bar, the brackets designed for it and the harness all arrive together. Add the OEM switch if you want a factory-look switch on your dash.
Why a Tundra Roof Light Bar on the 2nd Gen
A Tundra roof light bar has three big advantages over a bar mounted lower down.
Height Means Distance
A bar on the roof throws light over the bonnet and further down the trail than a bumper-mounted bar can.
Above the Dust
Bumper lights end up lighting the dust from your own front tyres. Up high, the beam clears most of it.
Out of Harm's Way
On the roof, the bar is clear of the rocks, brush and branches that take out bumper lights.
✓ Two Things Worth Knowing
A bright roof bar can reflect some light off the bonnet, and it is an off-road light, so it should be off around other traffic. Check your state's rules on auxiliary lighting before using it on public roads.
Slim or Dual Row Bar
The brackets can mount either a slim or a dual row 52" curved Tundra LED light bar. A slim bar keeps the profile low and tidy. A dual row bar packs two rows of LEDs into the same length for more output. Both sit on the same brackets, so choose on the look and the light you want.
A 52" bar is a big electrical load, so plan the wiring properly. Run it on a proper harness rather than tapping into a nearby circuit, and use it with the engine running. If you are buying the combo, ask us for the exact wattage of the bar so you can check your electrical setup has the headroom.
Installation
The brackets mount by drilling into the roof, using the hardware included. Because the holes are permanent, a careful install pays off.
- Know what is under the roof. Before drilling, check what sits behind the roof skin at each hole, including headliner wiring.
- Measure and mark twice. Line up both brackets and check the bar sits square before drilling a single hole.
- Start with a pilot hole, then step up to the final size for clean holes.
- Seal every hole. Treat bare metal with primer to stop rust, and seal around the fasteners so water cannot get into the cab.
- Route the wiring neatly and test the bar before final tightening.
- Re-check the brackets after your first rough road. A 52" bar puts real load on its mounts.
Specifications
| Fitment | 2007-2021 Toyota Tundra |
| Light bar fitment | 52" curved LED light bar, slim or dual row |
| Brackets | Custom-designed and laser cut, sold as a pair |
| Finish | Black semi-gloss mini texture powder coat |
| Installation | Requires drilling into the roof |
| Hardware | Included |
| Variants | Brackets kit, or combo with 52" curved light bar and wiring harness |
| OEM switch | Optional add-on |
| Fabricated in | Fort Worth, Texas |
| Warranty | 2 years |
What's Included
- Pair of 52" curved light bar roof brackets
- Installation hardware
- Combo variant: 52" curved LED light bar and wiring harness
- OEM switch, if added
Pros
- Brackets made specifically for the 2007-2021 Tundra
- Combo option gets bar, brackets and harness in one order
- Takes slim or dual row 52" curved bars
- Roof height gives distance and keeps the bar out of harm's way
Cons
- Requires drilling into the roof
- A 52" bar needs a properly planned electrical setup
Frequently Asked Questions
Do I have to drill my Tundra's roof?
Yes. Installation requires drilling into the roof. Seal every hole and treat the bare metal so water and rust stay out.
Is the light bar included?
It depends on the variant. The combo includes a 52" curved LED light bar and wiring harness. The brackets kit is for owners who already have a 52" curved bar.
Which Tundra years does this fit?
The brackets are custom-made for the 2007-2021 Toyota Tundra. Cali Raised cannot guarantee fitment on other vehicles.
Will it take a slim light bar?
Yes. The brackets can mount a slim or dual row 52" curved light bar.
Is a switch included?
An OEM switch is an optional add-on you can choose when ordering, for a factory-look switch in your dash.
Complete Your Build
Brackets or the Full Combo?
Tell us your Tundra's year and what you already have for your Toyota Tundra light bar setup, and we will make sure the right brackets, bar and harness ship together.
844-200-3979
