Cali Raised LED Stealth Bumper for 2024+ Toyota Tacoma
Cali Raised LED Stealth Bumper for 2024+ Toyota Tacoma
The 4th gen Tacoma looks sharp from the factory, but that front end is mostly plastic, and plastic is no help against a rock, a stump or a recovery strap. Most steel bumpers fix that by bolting a big slab of armour onto the front of the truck. The Cali Raised Stealth Bumper does the job without the bulk.
It is a low-profile 2024 Tacoma front bumper built from high-strength steel with a 3/16" steel faceplate, designed to follow the factory body lines. It protects the grille, radiator and front-end components, adds two 3/4" recovery points welded directly to steel frame mounts, and has a cutout built in for a 32" LED light bar. At about 45 lbs it adds protection without weighing down the nose, and it keeps Toyota Safety Sense working.
Check Before You Order
Trailhunter owners: the bumper does not fit with the factory Trailhunter skid plates installed. It does fit once those skid plates are removed.
Slight trimming required: the bumper bolts to factory mounting points, but the factory bumper needs a little trimming during installation.
4th gen only: designed for the 2024+ Tacoma. Fitment on 2005-2023 trucks is not guaranteed. Questions? Call 844-200-3979.
Why a Tacoma Stealth Bumper on the 4th Gen
A Tacoma stealth bumper sits low and close to the factory shape rather than replacing the whole front end with something bigger. On the 2024 Tacoma, that gives you three advantages over a bulky full replacement:
Keeps the Look
The bumper follows the 4th gen's body lines, so the truck still looks like a Tacoma, just a tougher one.
Less Weight on the Nose
At about 45 lbs, it adds less weight ahead of the front axle than a typical full replacement steel bumper.
Better Clearance
The high-clearance profile helps reduce front-end hang-ups on climbs, ledges and washouts.
✓ Toyota Safety Sense Still Works
On a new truck, losing your driver-assist systems is a real concern. Cali Raised confirm this 4th gen Tacoma front bumper is compatible with Toyota Safety Sense.
Built for Recovery
A plastic factory bumper gives you nowhere sensible to attach a strap. A steel 2024 Tacoma front bumper fixes that. This bumper has two 3/4" recovery points welded directly to the steel frame mounts, so recovery loads go into the frame rather than into the bumper skin.
Use properly rated 3/4" D-ring shackles or soft shackles that suit the points, and recovery gear rated for the job. Cali Raised list heavy-duty 3/4" D-ring recovery shackles as a matching add-on.
The 32" Light Bar Cutout
This Tacoma stealth bumper has an integrated cutout for a 32" LED light bar. It takes single row or dual row bars, but it is designed primarily for dual row, which fills the opening and gives you the most output.
| Light Bar | Fit |
|---|---|
| Cali Raised 32" Dual Row 5D OSRAM, spot or combo beam | Designed for it. The recommended option |
| 32" single row bars | Fit the cutout |
Light bars are sold separately from the 4th gen Tacoma bumper.
A 2024 Tacoma Winch Bumper, With the Tray
The bumper is winch-ready, but the winch mounts on the Cali Raised Winch Tray, which is sold separately and required for any winch installation.
| Winch Detail | With the Cali Raised Winch Tray |
|---|---|
| Winch capacity | Most 8,000 to 12,000 lb winches |
| Solenoid | Remote-mount solenoid box required |
| Mounting pattern | (4) 1/2-inch x 10, as listed by Cali Raised |
| Winches Cali Raised list as add-ons | SCAR 10S, Warn VR EVO 10-S with synthetic rope |
A winch adds a lot of weight right at the front of the truck, so factor that into your front suspension. If you are not sure your winch will fit, tell us the model and we will check.
Which 4th Gen Tacomas It Fits
| Your Tacoma | Fits? |
|---|---|
| SR, SR5, TRD PreRunner, TRD Sport, TRD Off-Road, Limited, TRD Pro | Yes |
| Trailhunter with factory Trailhunter skid plates | No |
| Trailhunter with those skid plates removed | Yes |
| TRD Pro skid plate | Compatible |
| Most aftermarket skid plates | Compatible |
| 2005-2023 Tacoma | Not guaranteed |
Cali Raised say the Cali Raised Stealth Bumper is best paired with their own skid plates.
Installation
This 2024 Tacoma bumper bolts to factory mounting points with standard tools, and Cali Raised estimate about 2 to 3 hours. Mounting hardware and the bracket are included. Slight trimming of the factory bumper is required.
- Mark the trim lines carefully and cut a little at a time. You can always take more off.
- Look after the sensors. Keep track of any front sensor wiring while you work, and check Toyota Safety Sense and any front sensors work before you finish.
- Get a second person. A 45 lb bumper is awkward to hold in place while you start bolts.
- Running a winch? Follow the winch tray instructions for the order of assembly.
- Re-check every bolt after your first trail run or recovery.
Specifications
| Fitment | 2024+ Toyota Tacoma, 4th generation |
| Construction | High-strength steel with 3/16" steel faceplate |
| Finish | Black powder coat |
| Weight | About 45 lbs |
| Recovery points | Two 3/4" points welded to steel frame mounts |
| Light bar cutout | 32", single or dual row, designed for dual row |
| Winch | Requires Cali Raised Winch Tray; most 8,000 to 12,000 lb winches with remote solenoid |
| Toyota Safety Sense | Compatible |
| Skid plates | TRD Pro and most aftermarket skids compatible |
| Trailhunter | Only with factory Trailhunter skid plates removed |
| Installation | Bolt-on at factory points, slight factory bumper trimming |
| Install time | About 2 to 3 hours |
| Fabricated in | Fort Worth, Texas |
What's Included
- Cali Raised LED Stealth Bumper, black powder coated
- Integrated 32" light bar cutout and two 3/4" recovery points
- Required mounting hardware and bracket
Sold separately: winch tray, winch, bull bar, light bar, front license plate mount and recovery shackles.
Pros
- Steel protection that keeps the 4th gen's factory lines
- Two 3/4" recovery points welded to the frame mounts
- Works with Toyota Safety Sense and the TRD Pro skid
- About 45 lbs, light for a steel bumper
Cons
- Slight trimming of the factory bumper is required
- Winch needs the separate tray, and Trailhunter skids must come off
Frequently Asked Questions
Will this 2024 Tacoma front bumper fit my Trailhunter?
Only if the factory Trailhunter skid plates are removed. It does not fit with them installed. Every other 2024+ trim is covered.
Can I fit a winch?
Yes, with the Cali Raised Winch Tray, sold separately. With the tray it supports most 8,000 to 12,000 lb winches with a remote-mount solenoid box.
Does it work with Toyota Safety Sense?
Yes. Cali Raised confirm the bumper is compatible with Toyota Safety Sense on the 2024+ Tacoma.
Which light bar fits?
The cutout takes a 32" single row or dual row bar and is designed primarily for dual row, such as the Cali Raised 32" Dual Row OSRAM bar in spot or combo beam.
Do I need to cut my factory bumper?
A little. Slight trimming of the factory bumper is required, and the bumper bolts to factory mounting points. Cali Raised estimate 2 to 3 hours in total.
Complete Your Build
Winch, Light Bar or Bull Bar?
Tell us how you want your 4th gen Tacoma front bumper set up and we will make sure the bumper, tray and accessories all ship together.
844-200-3979
